error

Hey Guys, SM52-5PL Error codes on display are 20:33, 20:34, 20:65. I have a new problem I'm hoping to get some direction on here. We had a fan go out in our Basic Module 2, which after replacing the fan, now the heat lamps will not turn on. The coolant is at the correct level. On the control...

Our DCS 1800Z printer started giving a fatal error after a power outage. We’ve tried replacing the capping station as well as restarting the machine and cleaning it but nothings fixed it. Has anyone experienced this issue before or has any tips about clearing/fixing the error?

Hello everyone. I have a problem with our SM102. However, I don't notice anything when printing. does anyone know the error? Thank you

I own a Polar 115 PF paper cutting machine. The problem is when I turn it on, it shows a white screen and making a nonstop beeping noise. I don't know what is happening because I can't find the error code for this issue. Would really appreciate any help to resolve this issue. *Uploaded a picture

Hi Everyone, I am looking for some assistance on an error I'm getting on my press. We purchased a used press from the UK about 2 months ago and has been a nightmare since it arrived. The press hasn't started running yet. We're stuck at the following error: Monitoring of Reversing Cylinder -...

2001 Heidelberg SM 52-5P, CP2000 Need help please. The press was running in perfect mode, and I started the changeover to straight mode. The press sounded like it was doing all the correct moves and no errors were thrown, but after I ran the process the console still showed it was in perfect...

Received this message when I turned on the machine. -Turn on machine > Warning message -Error on hard disk -Screen takes a while to respond Any solution for this problem. Thank you in advance.

Hi, I have a Focus Sapphire Jet Plus UV Flatbed Printer with the Epson L805 driver but there is always an error. I cant even print :( Sometimes the error is a paper load, paper jam oder just error and all three lights are blinking. Maybe you have an idea because i am pretty disappointed and...

Hello! We are running a 2007 SM 74 PHL. Recently there was a leak from the refrigerant tank of the chiller and there was low pressure warning on the display of the beta.c fault messages with the following error : F094 low pressure of compressor. The exhaust fans on top and the compressor...

I have an error code 15-10, and the press doesn't want to eject the plate, whenever i press the button to eject it, it just gets into position to accept a new plate, but doesn't release it and eject it. Can anybody help? Thanks..

I will start by saying I'm fairly new at printing certainly do not know much about anything, but I bought this printer L1800 after looking at reviews ALOT. All well until today, when I went to print a photo o magnetic paper, which I had before on this very printer and all was well. So I printed...

Hi, I have a Xerox 700dcp. I got a error that I can't get rid of and can't find anywhere (#041-347). It starts printing for a few minutes, then stops with error. Any ideas what's going on and how to fix? Thanks.

Hey guys, Having an issue with a komori lithrone 40P. The computer that has the KMS software on it is having a problem sending ink key data to the PQC-S. The transfer gets halfway and then errors saying "communication failed, cause unknown". Has anyone had this issue and knows how to fix it? We...

There seems to be an error in the software. Based on the DYN-test-1, the lowest part (HWI) shows that it is 7FDF. Problem with the machine is that the machine won't stop while installing the CTCP imaging plate. There seems to be an inching problem. Any kind of help or advice will be appreciated...

Hi all. I am new here. I am having issues with my Wohlenberg 115 MCS-3 not starting. I will go though the start up (turn switch and key on). Machine will do a check and be ready. So I press the green button to start it up, and it will then cycle. Contactors K0, K1, and K3 pull in. Then...

Hi, I have gone through all the technical books I got with the machine, but I have not been successful in finding the details of the errors displayed on the feeder side of the machine. I have attached the details I received. Hope someone could help me out. Thanks, Charith

Hi hope someone can help I have the Morgana cardxtra it works fine with the hc-1 and dc-1 however when I use the mc-1 business card cutter it suddenly started jamming up for no reason? The unit appears to cut on the left hand side and right hand side but not in the middle. any help would be...

I am getting a warning Knife afterrun (703). Does anyone know what this error is. Richard

We have a 6 color with a Drystar 2000 ir dryer. We replaced the ir bulbs but we just got an error 2011. This is maintenance, ir max running time reached. I believe I just need to reset or acknowledge the error. If anyone knows how to do this it would be much appreciated. Richard

HI everyone. I have an error 10 and the machine doesn't move. I look on the service manual and no further referece is on it.:confused: At the beginning it does move, then I tried to pass paper, no impress, it comes well from feeder to delivery, then we tried to pass again, the machine displayed...