Heidelberg CP -Tronic Feeder errors

Discussion in 'Heidelberg Printing Presses' started by cc1433, May 25, 2018.

  1. cc1433

    cc1433 Member

    Joined:
    Nov 2010
    Messages:
    35
    Location:
    Sri Lanka
    Hi,
    I have gone through all the technical books I got with the machine, but I have not been successful in finding the details of the errors displayed on the feeder side of the machine.
    I have attached the details I received. Hope someone could help me out.
    Thanks,
    Charith
     

    Attached Files:

  2. turbotom1052

    turbotom1052 Senior Member

    Joined:
    Oct 2008
    Messages:
    599
    Location:
    Vermont
    what EXACTLY are you asking? The icons that show on your screen are pretty straightforward in their explanations.
     
  3. cc1433

    cc1433 Member

    Joined:
    Nov 2010
    Messages:
    35
    Location:
    Sri Lanka
    sorry my concern was on No.7 which states, "pull error". That has been popping up, and I was trying to understand if its the transfer cylinder pulling the papaer? If so wouldn't this statement be ambiguous with No. 3 Early sheet? Or am I assuming the wrong thing?
     
  4. turbotom1052

    turbotom1052 Senior Member

    Joined:
    Oct 2008
    Messages:
    599
    Location:
    Vermont
    the pull error icon would indicate that the side guide is either not pulling the sheet its full travel or over pulling and going under the guide.
     
  5. cc1433

    cc1433 Member

    Joined:
    Nov 2010
    Messages:
    35
    Location:
    Sri Lanka
    Thank you very much Turbotom. :)
     

  6. turbotom1052

    turbotom1052 Senior Member

    Joined:
    Oct 2008
    Messages:
    599
    Location:
    Vermont
    it should be noted that there will be an audible alarm sounded every time the midi display shows a side guide fault, as long as the audible is turned on in cp tronic
     
Loading...

Share This Page