Hello Everyone, My Heidelberg SM102SL DYN test flashing on the following: DYN TEST 1 REK1 7DFF DYN TEST 2 ALL NORMAL DYN TEST 7...
I got this error message: CPT did not send COMMAND REPLY -FATAL ERROR [ATTACH] ¿any clues? thanks
Hello, I was running a job and went to go change the plate, and the press stopped not in the correct position for a plate to be loaded and now...
Hi all, we have a major problem with our Mimaki UJV160 and was wondering if anyone had come across it before. On startup of the machine the...
Hi, We have noticed a problem with our pile feeder getting stuck on our heidelberg SM74 2004 and not being able to move it. An error message...
We just installed an idigo 5000, and when we power up the computer, we are getting a CAN_BUS_DEAD_NODE, and can_bus_IOC error. The stacker isn't...
So out of the blue we keep getting these 035-718 fax errors on our Xerox WorkCentre 6605. We get a report of the error noting: Remote station:...
Hey all, first time here and posting. I've done a cursory search through this forum but haven't found anything remotely close to the issue I am...
Anyone know it affects and how this error is repaired E4203: PGON is not asserted. on Screen Platerite 8100 I saw the same as Ex203 in...
Hello I need some help, i´m getting these error message often, mostly on YY color, why am i getting this error so often? i do clean the...
Hello everyone, We have a used 2007 PM74P. I've using it with no problem until yestarday that we tried the perfector for the first time. I...
Hey all. I'm running a QMDI 46 Plus. This morning my plate vacuums seem completely dead, zero section. I burnt a job and it cycled through...
Hi all, I just bought a used pm 52-1 but I am unable to use it since the machine stops responding after about 15 minutes of turning it on. Even if...
Hello, I am receiving on the screen of my Heidelberg SM 52-2 an error of the perfector. But the strange thing is that the machine is without...
Our Itek 617s platemaker is giving an error "knife jam".... and the last few pages (33 to 42) of the "Operator's Guide" which came with the...
Hello sir, I am an owner of a SM52 2 color and from Friday I found a problem with the machine. The sensors that detect double or missed paper...
I have experienced a 15-02 error code. Comes and goes. (Press moves during brake test-mechanical brake defective) Can this be fixed without...
Hi guys, I'm looking for AGFA Xcalibur 45 error list and explanation of solving that error. I have some problems in CTP Thanks for...
Thought I'd put this up as a new thread... Our intermittent 'Peep!' is coming from the Main Brake Error siren on the main control cabinet....
We have an Ikon Branded CPP500. I am getting a error code, C4522 and have recently had one that was a C2701. Can someone tell me what the codes...