sm74

For sale as a owner Heidelberg SM 74-5+L year 2000 counter 168 mio Format max.: 520x740 mm straight five colour Autoplate CP 2000 Ink temperature control water cooled Automatic impression cylinders washing Automatic blanket washing Automatic rollers washing Suction feed table, Steel plate...

I don't have the documentation for Alcosmart AZR (101.02.5003). Can someone kindly provide me with a list of spare parts? I need the numbers for: 1. Calibration container 2. Membrane 3. White filter cube (looks like pumice) 4. Gas sensor (Type G) I need to order these things now.

hello. We have a SM 74. Machine was running fine and we had a power surge. We restarted the machine and it will not print. Gives us error about not enough pressure. We checked the lines and we have 140 psi coming into the machine. Could it be electrical? Any ideas?

Has anyone been through this error? Sm52-5-p-L cptronic with IR. The machine suddenly stops and the following error messages show up. The machine runs after the error. It doesnt get blocked. Any suggestions?

Hello everyone! First time poster, casual reader here; I was setting rollers today as I wasn't happy with how my dampening system was washing up recently, well now after setting all rollers the inkwrs wash up beautifully and it stops at the intermediate roller and down. After further...

Hello. friends. Please give me the solution we attached my prob

hey guys. we have a sm 74 with coater. For some reason, the coater pump / system just turns off. the coater roller continues to spin but the pump will not turn on. We checked the level sensor and it is fine. We also checked the pump, but it seems fine. We also checked the plugs and they...

Hi everyone, last week our compressor wasn't starting so we ended up installing a new since the original one seemed to have been stuck due to running with low pressure refrigerant. Now on Monday when we switched on the machine, again the same issue. Even the exhaust fans at the top are not...

Hey guys. I am having error code 12 pop up on the press and it shuts down. The code is for delivery but the area is clean. Any ideas?

Hi Everyone, I am looking for some assistance on an error I'm getting on my press. We purchased a used press from the UK about 2 months ago and has been a nightmare since it arrived. The press hasn't started running yet. We're stuck at the following error: Monitoring of Reversing Cylinder -...

having issue with press. it is down. have code 15 on machine. it gave us this error before and we switched boards and it fixed the problem. We now have same code. We tried switching boards but machine is still down. Any suggestions?

Hi. I have a sm74 and we are having issues on second unit. we have error code that says “finger protecting bar actuated”. We opened the unit and everything looks fine Any ideas what it can be? Machine will not run.

I am looking for a SM74. If you have anything to offer please give me a call or email. 615-382-6311 or Whatsapp 615-394-5833 email; brad@dixiereproductions.com

we are trying to install a new jacket on the last cylinder but the screw / nut is stuck. Any ideas on how we can remove? We tried using pressure, but do not want to snap the screw. Please let me know if any of you have had this issue. Thanks!

Received this message when I turned on the machine. -Turn on machine > Warning message -Error on hard disk -Screen takes a while to respond Any solution for this problem. Thank you in advance.

We offer you the best quality spare parts for all Heidelberg printing machines, with a wide range of new circuit board parts, electronic parts, sensors, bearings, cam followers, motors, pneumatic and hydraulic parts. We provide Heidelberg parts online and guarantee the performance of your...

My company owns a SM74 Heidelberg press and there seem to be a problem with it. The technician does not seem to have any solution. Please help me with this issue. Thank you in advance for the replies.

Hi, so hopefully my machine should land in Sri Lanka by early next month. The reason behind mentioning that we live in Sri Lanka, is that we have a humidity of close 80-90% and the year round temperature is 27-33 Centigrade. This means if we are running this machine we would require to air...

Hi all. I had a Speedmaster 74 (1997) and it has stopped working for two months now. The press can be turned on but the air from the compressor won’t enter the press so the press won’t run. I attach the screen appearance, please check. As you can see there’s some sort of issue with the...

Hi, I am in the process of purchasing a SM74, and we have got some offers with high piles. I would like to know what advantages would we have if we have a high pile, other than for the convenience for the operator. We do print alot of Solid sheets damperless in our current operation.