Error Code 15 - SM 74

having issue with press. it is down. have code 15 on machine. it gave us this error before and we switched boards and it fixed the problem. We now have same code. We tried switching boards but machine is still down. Any suggestions?

 

Hi,
Error 15 is related to Main Cabinet. You need to check malfunctios. Send some photos and then I will let you know more.

 

Here is the photo from the screen. Please let me know.

 

Ok, do as follow:
Press service button, find "Diagnosis". Under this menu, on the top bar, there is a sign like "Monitor Screen". There you need to find Input/Output tab. Then find "SEK". Take a photo from there.

 

You have a plausibility problem; there is also a message in blue at the reception. Take a picture to find out what it is?

 

Here is the photo. Please advise.

 

Click on the reception button where there is the blue dot and take a picture

 

I do not see blue dot. Where can i find the blue dot?

 

In the picture I gave

 

this is the only photo i have with a blue dot. Please let me know.

 

This error message in blue will not let the machine start; to eliminate this problem try to open then close the sheets at the top of the reception. If this problem does not disappear then check the safety switches; surely you will find a faulty switch

 

Please push here like in the picture and take me picture to see

 

Did you solve your problem?

 

I am checking the switches this morning. Should i check a particular switch?

 

I checked the switches and they are all working. We checked the switches in the picture below.

Are we checking in the correct location? Please let me know.

 

Please do as I say on this message and take a picture for me to see

 

we have checked each switch on operator side and they are working (5 switches).

Please let me know.

 

Please click here and show me to see what is the message

 

Here is the message. Let me know.

 

It should run with blue? The light here is not turning on which will not let the press run.

We took card out of cabinet and switched the third with the fourth board. That worked before but now it is not working.

Let me know what you think.