problem

Hello, good morning. My name is Andres, and I’m writing from Argentina. I am using an AI to translate this, so I hope the technical terms are clear. We recently acquired a 1991 Heidelberg GTOF with an ALCOLOR system. We are having trouble calibrating the dampening unit because we don't have the...

Hi There.... We are having problem with our Sakurai Oliver 266 EPZ machine. It get stopped a few moment after sheets were transferred from feeder. The lcd monitor showing "Mis Fed Sheet" message, even there weren't any papers miss-aligned. We tried to check the 2 feeding optic-sensors signals on...

I encountered a problem where my paper print shrunk after the process of laminating. The only process before laminating is the offset print. I assume it has something to do with the heat from the laminating, but I can't be too sure. Has anyone encountered this problem before? Any advice would...

I own a Polar 115 PF paper cutting machine. The problem is when I turn it on, it shows a white screen and making a nonstop beeping noise. I don't know what is happening because I can't find the error code for this issue. Would really appreciate any help to resolve this issue. *Uploaded a picture

Lines keep appearing when I print on block colors that are soft as seen on the picture. What is weird is the lines are not consistent on one side of the sheet or top of the sheet, it is random on every up in the sheet. Checked the plate with a loop and can't see any lines on it. Any idea what is...

Any idea what's causing these excessive water below the pan? It never happened before until today. And it's not condensation from the pan above, the chiller was set to 8 degrees Celcius.

Hi, I have recently purchased a used SM-74 2010-2011 model for colour printing. The machine was properly installed by the engineers and is now in production. The machine has 5 colour units plus one unit for the coater. However, my operator is facing issues in using the AXIS CONTROL feature of...

Dear all, I am having a trouble with my GTO-52 1 colour. Last friday, the gto was printing good and all. On Saturday, upon turning on the main switch, no lights whatsoever was on. Taking apart the main power box and testing all fuses, Fuse F7/L3 was blown out and replaced it today, the machine...

My company currently own a FS-500-P2N1 Focusight. However there is a problem where the machine sometimes work for a full day and the next day the LED light at the back shows 1 red light or the capture card. The manual indicates that it is a camera problem but there is no problem with the camera...

My company owns a SM74 Heidelberg press and there seem to be a problem with it. The technician does not seem to have any solution. Please help me with this issue. Thank you in advance for the replies.

Dear all I have I problem on my SM 52 machine. 5 color machine. the problem is on the 4th tower where there is a problem with the print out. Presetting for the thickness of the paper is normaly set, CPC 1,04, but when I actually run the machine I have to add about 0,08-0,10mm of pressure on...

hi! so, suddenly our printer is printing a requested hue but with the left most portions warmer and the right more portions cooler in tone. it's a slight shift but obvious to the eye. kind of an ombre effect. we have swapped everything out and wiped everything down and it remains the same...

Hi Guys, So my cutter is having a problem with its monitor. The bottom of the screen it blacked out. You cant see what you are typing in. attached is a picture. Any ideas on how to fix or how much something like this would cost to get fixed. thanks so much.

Hello... I`m a new member here, and also new to the whole offset printing world. In the printing studio where I work we have a problem (after moving to another location) with CPC. I now it could be thousand reasons for malfunction (technician that disassembled the machine comes with a lot of...

Hello. I have a Konica Minolta Bizhub C220 and for 2-3 weeks it have a awful noise. Here is the video with it. https://www.youtube.com/watch?v=8UF25I4ACgc What is the problem ?

Hello All, just having a recent problem with my numbering unit on a GTO 46. its in great condition, all of a sudden i cant get it to number on the drive side. there is a clearance between the box and the inking rollers. i dropped them as far as they go and they still wont ink the numbers. I put...

Hi. I have a problem with Indigo 5000 machine. If i do for example 1000 copies of the same job, machine leaks(i think) oil on part of it. It's not reccurent. It happens every fiew sheets, but what is the most interesting it happens only on one separation - cyan. When I do "Printing Quality...

Hello everyone:) This is my first post and my first thread on this forum. If I made a mistake and this thread belongs somewhere else- my humble apologies and I will remove it and place it in appropriate sector;) As the title of my thread betrays, I have a problem with ciss on my aunt's Canon...

Hello ColorPrintingForum, We are a printing house in Albania we have bought a Heidelberg SpeedMaster 102 - 10 color P6 ,we put to work the machine in thursday after one day work and everythink was working properly a problem happened with the main motor. So our problem is when we start the...

Hi, we bought a phaser 7800 printer about one month ago. We are a digital print center and one of our main jobs is printing business cards. To print the business cards I impose the business card on a professional s/w and export to PDF. So I have a 20up SRA3 image ready to print at a...