oki

I have the following problem, I should replace the Fuser Film Sleeve and Pressure Roller. I searched all over the internet, alibaba, aliexpress etc... I am looking for these 2 components to replace the OKI es9431 (oki c911, c931... similar series). On these sites I find many components but I...

I have this problem both on Black Only (K) printing and on CMYK color printing. The colors come out Light, the toner is not dense. (The attached photos are of Black and White printing, but if I print in color the result is the same with the 4 colors, washed out image. This happened after having...

I have the following problem, I should replace the Fuser Film Sleeve and Pressure Roller. I searched all over the internet, alibaba, aliexpress etc... I am looking for these 2 components to replace the OKI es9431 (oki c911, c931... similar series). On these sites I find many components but I...

I have this problem both on Black Only (K) printing and on CMYK color printing. The colors come out Light, the toner is not dense. (The attached photos are of Black and White printing, but if I print in color the result is the same with the 4 colors, washed out image. This happened after having...

I purchased an OKI C831 earlier this year, second hand. All of the consumables are completely topped up, the life span of all of it at near 100 percent. It's given me some really great prints in the short time I had all four colours topped up. I gave everything a clean and swapped out a magenta...

Hi. I've been using a C511DN for some years with few problems. a reliable workhorse. However this week I tried to print a DTP document and I got an error message. I hit print again, and it printed, but printed one page from the document twice. I then printed it again, and I got the error...

Hi y’all, Im trying to get my Ilumina up and running and am in need of a few parts. It seems no one here locally or vendors online have the part I’m looking for and if they do, it’s weeks and weeks out. I’m trying to find the motor Dc ID part# 42985001. I know the oki version works as well...

Hi! Bought this one used and have issues with some white spots/streaks/smears (see image). Any ideas of what could be causing this? Bad fuser? Bad belt?

I recently purchased two used OKI printers, a 941 and a 942. I am experiencing a strange issue on both machines when replacing the white toner. When the new white toner is added, the brand new Magenta cartridge instantly went from reading 100% to 10%. The same thing happened on BOTH machines...

Hi all! I run a small stationery business from my home. I exclusively use 120 lb. Smooth Digital i-Tone cardstock from Mohawk. Somehow I managed for 3+ years to operate at a substantial volume (~4,000 prints per month) using an HP m553n (Don't laugh! :) I went through two of these and a number...

Hi there. I am new to this forum and fairly new to laser printing. I am a wedding stationery designer and I print some of my work in-house on my little OKI c612n. I've had it for 10 months. I ran into a lot of issues and I am really stuck, as with the lockdowns (I'm in the UK), an engineer will...

I'm thinking about purchasing one of these OKIs to get into light production. Low volume flyers, postcards, business cards, letterhead, etc. Maybe 5,000-10,000 pcs runs. Anything larger I would outsource locally in Toronto. The ability to run laser envelopes is nice to have, but not a...

We recently purchased an OKI C942 with a Fiery Controller and envelope feeder. We need to do runs of 5,000 at a time or more. We input a quantity of 5,000 in the Fiery, but the machine only accepts a qty of 999 each time. So that means we need to send the job 5+ times. Is there a way to send...

Trying to decide on either a used Xerox Phaser 7800 or Oki C941 for small runs of same-day flyers, brochures and postcards for clients. Everything else goes to trade printer. Both can do around 350gsm maximum. Xerox Phaser seems to have the edge in terms of print quality (2400 x 1200 vs 1200 x...

Hi there, I have a serious problem. I want to scan to mail with our office OKI MC853 Printer, but somehow it's not possible to communicate with the SMTP Server. Check the following error: I use the following configurations and I even had a remote session with the OKI support. I had the same...

Just managed to get an OKI C511dn at a markdown price. I'm trying to get it to print PDFs from my Macs but having absolutely no joy with it whatsoever - OKI support is, well, there isn't any so it seems!!! I just wondered if anyone out there has one, whether you're using it for graphics work...

I have a Oki c9650n with new CMYK drums and toner cartridges installed. The toner levels are detected and show at 100%. When I print a demo page from the panel, the output is monochrome. What could be keeping it from printing in color?

Hi guys, I need support from someone who does or has owned this machine, I'm not getting much joy with the company I purchased it throw (X-press on demand) I'm getting a lot of mottling across a range of coated stock. I'm also getting a very grainy image on manual duplex on side 2. The...

We have OEM DRUMS that will work in following machines: XANTE ILLUMINA INTEC 2020 XEROX PHASER 7400 OKI C9600/9800/9650/9850/ES3640/CX3641 SHARP AR-C360 LUCIDIUM 9800/9850 These are Original Drums designated for LUCIDIUM 9800/9850 brand but with removal of Key-Plate on the back wall of your...

Hi, My Oki C5400 is leaving black spots on every print. The spots are very small. Predominantly black, but I have found the four colors. How can I solve this problem? Images: Click here for full resolution Click here for full resolution Thanks in advance and sorry bad...