dampening

Dear Sirs, We offer you : ROLAND RVK3B, serie 612, year 1979, water dampening, 4 colors, straight, size 72x102 cm, quick action plate clamps, oxydry weko, in production. PRICE : 22.500 EURO FCA Please check our latest stock list : HERE Best regards, Antonopoulos Themis / Sales Director...

Hey all, We have been having issues with our dampening roller/ spray bar giving us splotchy water marks on one of our half decks. We have changed out the roller, checked bearings and hardness, set to "Goss spec", changed spray bar nozzles, and done just about everything we could think of. One...

We offer you: HEIDELBERG SORDZ serial nr. 503197 water dampening chromed impression cylinders oxydry weko size: 64x91.5 cm quick action plate clamps in Athens-Greece (in our facilities) available immediately without damages on cylinders and gears PRICE: 9.800 EURO LOC (DISMANTLED-PACKED-LOADED)

Hi All, Can anyone enlighten me about the dampening type(s) (non-Conventional) to be expected in a 1987-88 Komori L440 (no plate cocking)? Specifically, their pros/cons and method to identify them.

I have a MOV with a Alcolor system and every time the green production button is pressed and the damp units go on impression it looks like a roof without a gutter as the water (9 degrees C) pi€€es down and into the drip trays. Can anyone she'd some light on this problem? It's only the first 3...

Hey folks, I've trolled these forums for years, thought I would join to ask a question. I'm in the market for a good used true 2 color press. I would like to know what would be a good recommendation that would have a lower learning curve (yes, I know the can of worms I'm opening here). I've...

So we just got this brand new press that doesn't even look like ink has been laid on it. We printed 2 jobs just fine when the Jim & Mike the Heidelberg Maitenence men were here from CT & MA. Anyways water is going everywhere..bottom line. Water is dripping into the ink tray (below the...

Hi All, There is obviously a difference between the two systems, as I have notice either or will affect the demand of the press. but could someone fill me in with what the major difference is, what is the key benefit of having an alcolor system over a varn? thanks again in advance! pp

Has anyone tried Westlands Weroaqua dampening rollers or the new Werodamp Lototec roller. Lototec = Hydrophobic coatings for pan rollers in dampening systems What is the connection between the lotusflower and Westland GummiwerkeGmbH & Co. KG? A great deal, becausethe way...

Hello I want to know about KOMORIMATIC DAMPENING system? How different between Conventional Dampening and Alcohol System? Thank

I am currently running a GTO 52ZP with bareback dampener ( only using one bareback dampener as I dont have the chrome distrubution roller ) The trouble is that over the last month or so I have noticed the dampening solution running and splashing down the inside of the machine on the right...

Kompac’s range of Automatic Dampening Systems can improve the performance on your press by eliminating the problems inherent in both conventional and alcohol dampening systems. The patented Kompac technology provides the operator with automatic ink/water balance. Kompac Automatic Dampeners...

Hi everyone, I've been here before trying to solve the same problem. We got this new machine and since i've had problems with dampening. The problem basically is that i get more water in the center of the plate than in the edges, so, i use less water=scumming in plate edges. I use more water to...

Hi All As my title says, i have a Multi 1650 with a Thistle Dampening and KimoSetter e2 plates. I am having a bit of trouble with my Thistle. Ive searched for info on this type of system but not having luck finding a manual. The person I got the press from asked me to check the bead on the...

My ink is turning milky which i have put down to the dampening solution transfering up the ink rollers i have altered the dampening but i either get milky ink or solid ink across the blanket I have just recieved a full set of ink and dampening rollers but before i replaced them i have noticed...

I have a Chief 217, the main head has a Kompac II and the second head has a conventional dampening system. Problem is when I try to run two color the second head is completely covering the plate in ink and it will not wash off until I turn the water on full and it floods the press. Any help is...

Hi.. Having a problem on an '88 GTOZ. Problem is, I seem to be doing something wrong when mounting the Dampening rollers in the machine (I get the left side in OK, {on both units} but the right side just won't go in) What am I doing wrong? HELP!!

Does anyone have a picture or the instructions how to set up these rollers? I got this press but I am used to Kompac dampners and this is my first experience with the convential dampening system. It's a 1 head gto-52. I have 6 rollers of various sizes and 2 sheets in a roll form. Looks like it...

I'm working first time an alcolor GTOZ. Took all the alcolor rollers away and put them back together trying to do it acording to manual. Only in my dreams it was easy. I can't get it to distibute water evenly in the plate, but my biggest problem is that i have a 3" water stripe coming from...

Can any one help with the following problem. When running gold or silver and long runs of blue i get a light band about 15cm from grip across the whole sheet and about 15cm down sheet. the press is a gto52 printmaster with ddi dampening.