CP tronic

[Dularchand saw]

Machine is working in single photocell but when I connect both photocell and power on machine.sparking and Both became defective .What can be the problem.only left side input 24volt DC plug problem.i did cross checking of photocell in right side.No shorting supply in left side plug

 

[Diagramamen]

Hello sir.
Enter the model of your machine so I can try to help by checking the diagram and the manual.
Contact me at " diagramasdemaquinas@gmail.com "

 

[ashok kumar]

IF IT IS CPTTONICS
BEFORE CONNECTING TEH SECOND pHOTO CELL YOU HAVE TO REMOVE TEH BYPASS IN PU1 lvt