CP tronic

Discussion in 'Heidelberg Printing Presses' started by Dularchand saw, Jan 9, 2019.

  1. Dularchand saw

    Dularchand saw New Member

    Joined:
    Jan 2019
    Messages:
    1
    Location:
    New delhi
    Machine is working in single photocell but when I connect both photocell and power on machine.sparking and Both became defective .What can be the problem.only left side input 24volt DC plug problem.i did cross checking of photocell in right side.No shorting supply in left side plug
     
  2. Diagramamen

    Diagramamen Member

    Joined:
    Apr 2016
    Messages:
    38
    Location:
    Brazil
    Hello sir.
    Enter the model of your machine so I can try to help by checking the diagram and the manual.
    Contact me at " diagramasdemaquinas@gmail.com "
     
  3. ashok kumar

    ashok kumar Member

    Joined:
    Nov 2017
    Messages:
    18
    Location:
    india
    IF IT IS CPTTONICS
    BEFORE CONNECTING TEH SECOND pHOTO CELL YOU HAVE TO REMOVE TEH BYPASS IN PU1 lvt
     
Loading...