sm52

Hello. Could you please assist me We have Error : F013 Can Addr.3 - TBC 1 (chiller stopped working) The machine operates only for a short time before shutting down. Help us, please.

Could you please tell me where I can find new or used parts for an SM52 machine (as shown in the attached image) at a reasonable price? , Since the old parts I am currently using have started to deteriorate, I would appreciate it if you could let me know where I can purchase replacements.

Good morning, any idea whats the problem if you can´t adjustable the dip roller to the chrome roller? It´s like the screw is not working correct or there is not enough pressure. You can turn the screw complet in and out. It´s just moving a little bit. Its on both printing units just A.S. , the...

Hi all, This error/symbol ones up on the display . Machine works fine and I think it's side lay related but if anyone knows exactly what it means it would help. Thanks.

2001 Heidelberg SM 52-5P3, CP2000 CpTronic Modular Fully automatic perfector We have run into another perfecting changeover problem. We were running in perfect mode, and initiated the changeover to straight. The press sounded like everything worked fine, there were no errors on the screen...

Has anyone been through this error? Sm52-5-p-L cptronic with IR. The machine suddenly stops and the following error messages show up. The machine runs after the error. It doesnt get blocked. Any suggestions?

Hello, I Have a 2003 SM52-5-P-L with cp2000. The machine was running normally yesterday. Today when started, it runs for 10 seconds then stops. Whenever you hit the run button, it runs for seconds then stops again. The brake is working fine. the air pressure is fine. On the main machine...

Dear All, I have purchased a new SM52-5-L-P 2003. with CP2000 and windows xp TECHNOTRANS alpha, and drystar IR. Everything seems fine and the machine used to run perfectly after installing it together. Out of nowhere, a "not enough water" in yellow, showed up on the cp2000 screen. The error...

I am under the impression that the SM52 could only perfect text weight stocks, is that true? Or is it capable of perfecting cover stocks, if so what's that limit on thickness? I would think a cover sheet, around 7-10pt would be ok, but maybe thicker ones would have marking issues? Of course...

2001 Heidelberg SM 52-5P, CP2000 Need help please. The press was running in perfect mode, and I started the changeover to straight mode. The press sounded like it was doing all the correct moves and no errors were thrown, but after I ran the process the console still showed it was in perfect...

Hi all, I'm looking for instructions / information or a procedure on how remove and clean the Crossflow blower (tangential blower) located behind the huge mains transformer that sits beneath the control cabinet of our machine. The fan is ok but is very dirty and doesn't start but if you push...

We offer you the best quality spare parts for all Heidelberg printing machines, with a wide range of new circuit board parts, electronic parts, sensors, bearings, cam followers, motors, pneumatic and hydraulic parts. We provide Heidelberg parts online and guarantee the performance of your...

We are looking for Analog output module type NJ-AY4V-MR by Fuji Electric as can be seen from the picture below. We hope to find people who can supply us with this sparepart, secondhand or new, of course it needs to be functioning well. Thank you in advance.

can anybody help with this error

Dear all I have I problem on my SM 52 machine. 5 color machine. the problem is on the 4th tower where there is a problem with the print out. Presetting for the thickness of the paper is normaly set, CPC 1,04, but when I actually run the machine I have to add about 0,08-0,10mm of pressure on...

There seems to be an error in the software. Based on the DYN-test-1, the lowest part (HWI) shows that it is 7FDF. Problem with the machine is that the machine won't stop while installing the CTCP imaging plate. There seems to be an inching problem. Any kind of help or advice will be appreciated...

Hi, Can anybody tell me what the wear limits are for inking rollers in an SM52. I'm sure there is a lower limit beyond which the adjustments cannot be reached? What is this limit for each roller or is there a rule of thumb? Eg: my RED form roller should have a diameter of 54mm but in actual fact...

Hi we have SM 52 two colour and the press starts up the the circuit breaker inside the electrical enclosure on the side of the press drops out and a symble a circle with a line at the bottom and the letter M in it the Vacuum pump seams to have stopped working the press starts to fun but the...

The icpb board which is located under the inkzone control panel is broken, the part number is 00.785.0117 anybody can suply me this part ?

sm 52 2color (speed master 52 2color) what is thes error plz help me to fix it i send an image from cpc look to the image and tell me whats the proplem and how we can fix it