sm52 2 dyntest error

Discussion in 'Heidelberg Printing Presses' started by andrysetio, Mar 23, 2019.

Tags:
  1. andrysetio

    andrysetio Member

    Joined:
    May 2011
    Messages:
    49
    Location:
    indonesia
    can anybody help with this error

    IMG-20190323-WA0068.jpeg

    WhatsApp Image 2019-03-23 at 14.06.20.jpeg
     
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,779
    Location:
    Managua,Nicaragua
    Hi sir:
    Normally this error is product from the section of servo drive of EWK defective. (Not controlling the servo drive).
    Test the 1) power supply for Board EWK's a) +5Vdc b) +24Vdc , use the schematic diagrams for Measure.
    2) Interchange some of the Good Boars EWK's from another section and see if the Error is coming again. or disappear.
    In that way is very easy to troubleshooting the problem.
    Clean very well with Electronic spray contactor cleaner ,the edge connector of Boards, normally is the source of problems.
     
  3. andrysetio

    andrysetio Member

    Joined:
    May 2011
    Messages:
    49
    Location:
    indonesia
    wow thanks i ll try
     
  4. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,779
    Location:
    Managua,Nicaragua
    ok sir.
     
  5. andrysetio

    andrysetio Member

    Joined:
    May 2011
    Messages:
    49
    Location:
    indonesia
    the problem is in the power supply board ntm, i get a electrician to fix it thanks for reply
     

  6. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,779
    Location:
    Managua,Nicaragua
    Great sir
     
Loading...