problem

our LS540(2008)- 1st unit using anti-marking paper and other 4 unit unit using anti-marking film the problem is there was always a mark on our job caused by dirty ICP. normally just wipe off the surface of the ICP will solve the problem but just for short term only another trick we use is to...

anyone know how to set back pressures on 526 By back pressures I mean how to calibrate cyl pressure to the gauges on the press Cheers :)

I am brand new to these forums! Great place...been doing some great reading! Of course, the way you find stuff is to have problems, and I am having some toning and buildup problems...see the pdf attached. This just recently started within the last month for some reason. I have changed...

Hi Sometimes when i am perfecting and running the machie fast, it checks out and says there is a fault on the 2nd unit!! the only way to remove this fault is to turn machine off and then back on again any ideas what it is??

hi for all the problem is the double-sheet detector not work... and I think these problem form the side lays and the way to adjast the side lays in the manual is not clear from manual: (Use the screwdriver to turn the adjusting screw until the...

I have a Problem when i feed sheets through the TOK, Its keeps folding 1 corner of the sheet, see picture below. Any help or suggestions? Thanks in Advance Billy

We have started having a problem with cyan ink feeding through to the yellow ink train And turning the yellow green Any ideas the press is a komori 526 damp and rollers set as per manual Fount has 2% sf1 and 6% alc Inks have been running fine until last week Cheers Tim

hi, i'm facing the doubling problem often in black unit. i'm working in a blanket to blanket, single width single circum web press and the black unit is the top one. i'm in need of all your valuable reply

Hello everyone, I'm operating a 4 color CD102 and lately i've been experiencing doubling problems in the first unit which is usually black. It seems like i have a problem with the 2 set of grippers on the impression cylinder in the unit (that's what i thought at first) but we called a guy...

I'm having a problem figuring out why two pages in a book i printed with an offset printer came out with squares on/as the text when all the rest of the pages are fine and were not done any differently. One page has the colons and page number as squares; and the other page has squares in between...

Hi We started to have registration problem with our air fed-folder some time ago. I remeber that when it frist got here, registration was almost perfect. We replaced the feed rubber bands and the red sheet separator and, i think it was then we started to have problems. We replaced them again...

Hi All As my title says, i have a Multi 1650 with a Thistle Dampening and KimoSetter e2 plates. I am having a bit of trouble with my Thistle. Ive searched for info on this type of system but not having luck finding a manual. The person I got the press from asked me to check the bead on the...

Hi everyone: I'm in a SOMRZ with conv. damps and having troulbe printing a solid with 80% screens inside it with metalic gold(P-871). The design has other screens(10% and 50%) and they open allright but not the 80%-screen circles! If i go with more ink so the solid look intense, the screens...

i have shinohara 56 one color machine. i cannot power on. when i power on, the power switch breaker down on my machine. what i have to do?

I am having a problem with out Printmaster QM46-2. Sometimes when we put the plates on either head, we are getting like scrape marks going on to the plate, Pretty sure they are coming from the guides that put the plate on. They then go onto ink up and need deleted off sometimes not easily...

Hello All. I run multiple 242s for heavy graphic coverage applications. 90% + 11x17 or 12x18 duplex. After running more than 750K prints on Mohawk Color Copy 98 60# cover stock, we began seeing really bad toner splotches and spots on our prints - regardless of the paper used. Xerox and I...

I have recently bought a 2nd hand QM46-2, Stil learning the machines tricks. When we print 2 colours the second unit's colour is not coming out correcltly on the one side it is relatively full coloured and on the other side it makes tiny bubles on the spot where the colour should be. Is...

I have a problem with my phaser. Today i turned it on and started printing and i started getting dirty prints. Paper comes out with a grainy grayish black spotted tone where there isn't supposed to be anything but blank white. Also i get a thin grayish black line and pictures come out with less...

this is the problem im having with my doculor 252 from xerox it only happens when i print 11x17 or bigger and only in the magenta and in the blue a little bit look at the lines on the right of the page there are continous. any body know what this is thanks?

any ideas as to why my decurler works great at slow speed 5ooo/hr.but doesnt de curl every sheet when i run faster.40 in miller