Safety module detect failure

[hanykahalfc]

Our xl 75 give error safety module detect failure

 

[Mathew]

What is that photo?

 

[hanykahalfc]

What is that photo?

sorry the correct pic is

 

[PWInc]

The message said 'Check your variant code'. Did you do this before looking for something else?

 

[hanykahalfc]

The message said 'Check your variant code'. Did you do this before looking for something else?

SAfety check done but still ask for this

 

[PWInc]

Did you replace any module or did you upgrade the software? Normally, during initialization the software check everything connected to the machine. Then you need to confirm if this is correct. If something is wrong as compared to the machine configuration, then you get this error.

 

[hanykahalfc]

Did you replace any module or did you upgrade the software? Normally, during initialization the software check everything connected to the machine. Then you need to confirm if this is correct. If something is wrong as compared to the machine configuration, then you get this error.

OMG the problem related to Main Drive it was so difficult to be discovered by heidelberg team