Safety module detect failure

Discussion in 'Heidelberg Printing Presses' started by hanykahalfc, Feb 7, 2024.

  1. hanykahalfc

    hanykahalfc Member

    Joined:
    Aug 2023
    Messages:
    23
    Location:
    Egypt
    Our xl 75 give error safety module detect failure
     

    Attached Files:

  2. Mathew

    Mathew Senior Member

    Joined:
    Apr 2010
    Messages:
    529
    Location:
    Kolding-Denmark
    What is that photo?
     
    hanykahalfc likes this.
  3. hanykahalfc

    hanykahalfc Member

    Joined:
    Aug 2023
    Messages:
    23
    Location:
    Egypt
    sorry the correct pic is
     

    Attached Files:

  4. PWInc

    PWInc Member

    Joined:
    Sep 2020
    Messages:
    56
    Location:
    Canada
    The message said 'Check your variant code'. Did you do this before looking for something else?
     
  5. hanykahalfc

    hanykahalfc Member

    Joined:
    Aug 2023
    Messages:
    23
    Location:
    Egypt
    SAfety check done but still ask for this
     
  6. PWInc

    PWInc Member

    Joined:
    Sep 2020
    Messages:
    56
    Location:
    Canada
    Did you replace any module or did you upgrade the software? Normally, during initialization the software check everything connected to the machine. Then you need to confirm if this is correct. If something is wrong as compared to the machine configuration, then you get this error.
     

  7. hanykahalfc

    hanykahalfc Member

    Joined:
    Aug 2023
    Messages:
    23
    Location:
    Egypt
    OMG the problem related to Main Drive it was so difficult to be discovered by heidelberg team
     
Loading...