Heidelberg CD-74-5+L-C problems. Safety covers but they are all closed and error Q1043

Discussion in 'Heidelberg Printing Presses' started by Raimis, Feb 14, 2024.

  1. Raimis

    Raimis Member

    Joined:
    Dec 2023
    Messages:
    13
    Location:
    Latvia
  2. Mathew

    Mathew Senior Member

    Joined:
    Apr 2010
    Messages:
    533
    Location:
    Kolding-Denmark
    Q1043 is pointing to Oil Lubrication motor breaker. You can find it inside the main electric cabinet.
    About the safety cover, there might be a damaged DIPM2 in Delivery which is very common issue.
     
  3. Raimis

    Raimis Member

    Joined:
    Dec 2023
    Messages:
    13
    Location:
    Latvia
    Hello. Thanks for reply. DIPM2???
     
  4. Mathew

    Mathew Senior Member

    Joined:
    Apr 2010
    Messages:
    533
    Location:
    Kolding-Denmark
    Are you a printer or technician???
     
  5. Raimis

    Raimis Member

    Joined:
    Dec 2023
    Messages:
    13
    Location:
    Latvia
    Do you mean electronic board in upper side of the delivery.
     
  6. Mathew

    Mathew Senior Member

    Joined:
    Apr 2010
    Messages:
    533
    Location:
    Kolding-Denmark
    Yes, in the back of Delivery panel. There are two LEDs above CANBUS cables (purple cables). Take s short video. I need to see the LEDs status.
    Did you check if Q1043 is tripped?
    You didn't say anything about the machine age!!!
     
  7. Raimis

    Raimis Member

    Joined:
    Dec 2023
    Messages:
    13
    Location:
    Latvia
    The year is 2005.
     
  8. Waqas_zahid

    Waqas_zahid Senior Member

    Joined:
    May 2011
    Messages:
    234
    Location:
    Pakistan
    A picture of the panel actually help, not really sure if there is a DIPM or just EAK's, could be blown fuses at the power distribution board inside the cabinets, like I said a picture would help.
     
  9. Adil

    Adil Senior Member

    Joined:
    Nov 2021
    Messages:
    865
    Location:
    Casablanca
    I think that there is a communication issue
     
  10. Raimis

    Raimis Member

    Joined:
    Dec 2023
    Messages:
    13
    Location:
    Latvia
    Hello there. Thnaks for the answers. As soon as possible i will take a photo.
     
  11. Raimis

    Raimis Member

    Joined:
    Dec 2023
    Messages:
    13
    Location:
    Latvia
    And there is two more problems with the press. Powder is not switching on and nothing is displayed on the screen on the feeder.
     

  12. Adil

    Adil Senior Member

    Joined:
    Nov 2021
    Messages:
    865
    Location:
    Casablanca
    Please i need picture of the mid
     
Loading...