heidelberg printmaster 46 Unit 2 wont insert plate at clamp

[Mark1125]

will not take the plate at clamp spring is at 5mm

 

[CHOCK]

Hi Sir:
1) Check condition and easy motion of guide rollers: Cleaning:check and replace if necessary
2)check plate loading and ejection function and reajust if necessary
check condition and function of friction rollers
check distance of feed rollers and guide plate to plate cylinder: Check and cleaning.

 

[Mark1125]

Do u happen to know the special funtion code to use to manually isert at tail clamp? Thank you

 

[Raphael Khumalo]

We have a similar problem with the second unit. It does not hold the plate for long. Plate slips out during run. Is there anything we can do to resolve the problem?

 

[CHOCK]

Hi sir:
You can do the same procedure:
Hi Sir:
1) Check condition and easy motion of guide rollers: Cleaning:check and replace if necessary
2)check plate loading and ejection function and readjust if necessary
check condition and function of friction rollers
check distance of feed rollers and guide plate to plate cylinder: Check and cleaning.

 

[Leon Patterson]

Do u happen to know the special funtion code to use to manually isert at tail clamp? Thank you

All guards closed, then S3+7, then 13

 

[CHOCK]

Hi sir:

What did happen ???

1) Check condition and easy motion of guide rollers: Cleaning:check and replace if necessary

2) check plate loading and ejection function and readjust if necessary

check condition and function of friction rollers

check distance of feed rollers and guide plate to plate cylinder: Check and cleaning.

Let me know

Blessing