water

Dear All, I have purchased a new SM52-5-L-P 2003. with CP2000 and windows xp TECHNOTRANS alpha, and drystar IR. Everything seems fine and the machine used to run perfectly after installing it together. Out of nowhere, a "not enough water" in yellow, showed up on the cp2000 screen. The error...

Description of the unique water-coloring printing technology: implement a new type of product in your printing house. The best quality, environmental friendliness and safety at the lowest cost. eurocarddruck@gmail.com

Any idea what's causing these excessive water below the pan? It never happened before until today. And it's not condensation from the pan above, the chiller was set to 8 degrees Celcius.

Dear Sirs, We offer you : ROLAND RVK3B, serie 612, year 1979, water dampening, 4 colors, straight, size 72x102 cm, quick action plate clamps, oxydry weko, in production. PRICE : 22.500 EURO FCA Please check our latest stock list : HERE Best regards, Antonopoulos Themis / Sales Director...

Maintain pH level for printing is between 5 to 5.5 pH And Conductivity is between 800 to 1800. How to reduce pH ?

So we just got this brand new press that doesn't even look like ink has been laid on it. We printed 2 jobs just fine when the Jim & Mike the Heidelberg Maitenence men were here from CT & MA. Anyways water is going everywhere..bottom line. Water is dripping into the ink tray (below the...

hi; I lost the water rollers of mi hamada DU34II. does anyone can provide me the Dimensions of rollers or the manual of machine ... thank you

Hello We are having trouble with our 2nd unit dampening system. When we turn it on it runs just fine. As we increase the speed above 4000 it stops turning. The geared silver roller and the drive train for it all stop until we slow the press down to idle then they start again. Any ideas...

I run a 6 color Speedmaster CD 102 and we do alot of UV work. We are having issues with UV wanting to pull back onto the water rollers during the run and will sometimes completely ink up the chrome and water pan roller. Alot of times we will have to stop, drain the water and clean the rollers...

running a ryobi 524H and since instillation have been having problems with unit 3 driver. the motor is slow to react at start up (error code 23) but when it does start it continues for rest of day. same problem occurs each day ? would appreciate any advice on this problem.

Hello, I hope somone can help me I have a QM-46-2 press, I run Poly Plates. My problem is that no matter what type of ink or fountain solution I use I have water being carried back to my ink and my paper will curl. I have reset the ink and damp rollers numours times, and I run the damp at a 1...

I run a 4 color Solna heat set web and I have a serious issue. I am getting a lot of rollback or feedback of ink onto my water feed rollers. I run a onestep fountain solution with a 4.0 ph, I have conventional water system and the feed roller is covered with a paper sleeve. If Marcus...

Hey all, Im hopeing someone can help me with what recover to go for on our 1996 L526 Lithrone, My rep tells me "Aqua master" rubber at 25 shore, as apposed to "Nitro" rubber, Any help appreciated, Thanks, Dean.

Does anyone have any suggestions on how to solve a water form roller problem on this press. When you put on the form roller and set it to specs. it will hesitate turning when it reaches the gap between plates and then begin again, which leaves a parallel ink mark on your first 30 sheets after...

Does anyone have a suggestion on setting the water form on a Komori Sprint 26 II. We have set it according to the specs. listed but still the form hesitates as it goes over the clamp area then start again once it hits the plate. We have tried tightening the roller etc.. but still have the...

Hi THere, I am a novice in the field of printing and so have lots of questions to ask all of ya. To start with I would like to know what could be the problems that a printer can face using water of very high conductivity say like 1600 micro seimens. I have visit one of...

Can somebody please help me. When I start the printing process there is a lot of water dripping from the lowest roller on the 1st unit. Water setting is at lowest. What i do i do stop this, if i give more ink it will eventualy emusify on rollers. I tried putting a dab of ink the water meter...

Hey guys, I have a Ryobi 522 2 color press with conventional dampening. What are some of you guys using for your ductor covers. We do quiet a bit of color changes, so Im needing something pretty durable. We use to get our covers from a guy that the owner has known for years, that deals in the...

Hello, I have been researching the process of water transfer/curve coating, and would like some added direction in what printer/software would be used to produce the image? Who is a good ink supplier? Thank you for any advice.

we have a 3302 H, it has leaked water around the damping system since day one and nobody has ever been able to tell me where the water is coming from. the side squeegees are replaced all the time and still drips and washes out the image for 25 or so copies,then prints good then drips again...