pro

I have a QMDI-46 Pro. Normally when running the press, during a jam-up or if the machine pulls a double, the suckers will still have a grip on the next sheet that it is about to pull, so I can just clear the misfed sheet, turn the press back on to impression and away we go. However, now what...

Can anyone tell me if my diodes have gone out or what the problem might be. The imaging on my yellow plate is aborting 1/2 way into the image or is only imaging 1/2 of the plate. My press is a 2002 QMDI Pro 46-4. Need help soon. Thanks Eric

Model: Heidelberg Quickmaster QM-46-4 DI Pro Year of manufacture: 2002 Impression Count (millions): 17 Located in Ontario, Canada Asking USD 75,000 or Any Reasonable Offer

workcentre pro c2636 communications encountered problem I turn on the printer and after a few minutes on the display I see this error encountered communications problem, reset system by turning power off, then on, using the white power switch.

Hi, I am able to buy a DI classic press just for parts. I have a DI Pro 1994, I like to know if I can use the lasers, rollers, delivery chain, and Air cilinders for impression cilinders. Please repley ASAP. thanks, Sjors:)

Anyone can compare these two models. Some users of QMDI have experience with Ryobi DI and vice versa but no one with Karat 46. Vladimir

Anyone that can make comparison between these two machines? And why is QMDI Pro so much more expensive than Plus. Is the IR dryer the only issue? Is there a third party IR dryer that can upgrade Plus model? Vladimir

Does anyone bought any of these machines (c9060, c9070)? Can anyone tell us a few things about quality or hevy stock usage? Compared to a Konica-Minolta?

For Sale, my Epson Stylus Pro 9880. Head, dampers & flush box replaced about a month ago & has 4 months left on warranty repair. This printer is sweet like new & has always printed perfectly : ) Clean non-production environment. Head replaced because the head was leaking on to prints once in a...

Hi everyone! I'm hoping someone can help me out on here. I have a QM DI 46 Pro and the VDU is on its way out. The touch screen is not as responsive as it should be and the operator is having problems changing the sheet size. I have been in touch with Heidelberg and their only solution...

What should the temp of a room be,to run a QMDI PRO My shop is real hot,,anywhere around 76 to 85 degrees,in summer. Should i out it in its own room?? I do thermo thats why it so hot..Thats also with the AC on

Hey guys what you think of this..This happened to me a couple hours ago. I opened up the job i needed to run on the moniter (to preview) to see if its all good to run.And when i opened it up,another job thats on the RIP opened up instead of what i had selected( the file name also changed).No...

Has anyone ever used a jx2150? Need a little help setting it up.

Does anybody know of a decent alternative for printing/proofing on this machine. I am currently using HP Coated Paper 24in x 150ft which I can get for around £20 a roll. Cheers Warren

Whats the Biz Hub Pro C500 like, can anyone comment on the Pros & Cons

Hi there, We are considering putting a Konica Minolta Biz Hub PRO C500. Can anyone advise if they have one and if so what are the Pros and Cons of this machine. Or alternativley any advice on it would be appreciated. Kind Regards Brian

Hi, new to the forums here, very informative. Wondering if anyone can help us. We have a 2001 QM-DI Pro that is driven by a Delta 7.5 rip. We do not have trapping on the delta. We also have a Compose Express Harliquin Rip that drives an agfa imagesetter, this rip has ITrap from Lucid Dream. Is...

We can offer both a QM DI Pro {2003 model with 7.5 mm impressions - $95,000} and a Plus {2002 model with 3 mm impressions - $96,000} printing presses for immediate delivery. Both are four color presses and are in like new condition. Please contact malahide@comcast.net for photos and specs.

epson ultra chrome k3 ink vivid magenta.never used,xtra roll of paper,8 cmky cartriges plus replacement cartriges. will sell all for 1500.00 usd.if interested contact me and ill will give you all the specs. and photos. ganzman72@yahoo.com

looking for technician password for Heidelberg QMDI4 PRO