Ricoh 9200 Help

[AllegroCP]

Hi everyone,

I am looking for some suggestions that will help me resolve my printing problem.

I am printing Business Cards on:
Material: 200# Finch Cover 19x13
First side has a photo 3 sided bleed.
Back side Black Print 4 sided bleed.

The problem I am having is that when we cut the cards it would leave fraying or white edges behind after cutting on the print.

I have attached photos for review.

Cutter is a Polar 92.

Thank you for the advance help.

 

[Biggs]

You’ll need to make sure you have a fresh, sharp blade installed in the cutter. If it’s just the top and/or bottom sheet that suffers from fraying, you can simply put a couple sheets of chipboard on the top/bottom of the stack