Ricoh 9200 Help

Discussion in 'Ricoh Color Laser Printers & Color Copiers' started by AllegroCP, Dec 14, 2020.

  1. AllegroCP

    AllegroCP New Member

    Joined:
    Aug 2020
    Messages:
    3
    Location:
    Lafayette
    Hi everyone,

    I am looking for some suggestions that will help me resolve my printing problem.

    I am printing Business Cards on:
    Material: 200# Finch Cover 19x13
    First side has a photo 3 sided bleed.
    Back side Black Print 4 sided bleed.

    The problem I am having is that when we cut the cards it would leave fraying or white edges behind after cutting on the print.

    I have attached photos for review.

    Cutter is a Polar 92.

    Thank you for the advance help. image2.jpeg image0.jpeg
     
  2. Biggs

    Biggs Senior Member

    Joined:
    Mar 2017
    Messages:
    208
    Location:
    Edison, NJ
    You’ll need to make sure you have a fresh, sharp blade installed in the cutter. If it’s just the top and/or bottom sheet that suffers from fraying, you can simply put a couple sheets of chipboard on the top/bottom of the stack
     
Loading...