Powder problem on SM CD 102-6 LX

[Arvin tirta]

Hay everyone, may I ask for help.
Powder not working while machine operating.
A week ago on the main panel trip for-15Q35. after we servis the powder compressor, It's run normally.
And now after trip again, the the machine can operate but the powder won't came out.

 

[junker1984]

Are you seeing pressure at the manometer? Did the carbon vanes degrade to the point they could be causing blockage?

 

[Beguin]

hello dear sir, please clean the pipes that transport the powder. thank you very much

 

[Bunkerintegrated]

Powder problems on SM CD 102-6 LX presses can be due to several factors. Firstly, poor powder application or dusting can result in inconsistent print quality. Secondly, poor selection of powder particle size can lead to excessive powder build-up or insufficient coverage. Thirdly, environmental factors such as humidity and temperature fluctuations can affect powder performance. Finally, mechanical issues with the powder spray unit or conveyor system can cause uneven powder distribution on the printed sheet.

 

[Arvin tirta]

Thank you everyone, your response are Great.
The problem was solved. We clean all socket on the powder panel with contact cleaner.
May be there was socket didn't connect properly.