Need help with man R900

[Gostavo91]

Hi everyone
I had an issue with man roland 900 lenze inverter with this reference : Lenze E82EV751_4B040 and i wanted to change it with another one with this reference : Lenze E82EV751_4B the only difference is in the output frequency
i have a uploaded a pic of the two of them
i copied the program from the old one and i did laod it on the second one but it didnt work ? Anyone can help ?

 

[CHOCK]

Hi sir;

Normally new devices are Updated with New software, meanwhile you load old software. NOT compatible

Blessig, Merry Christmas.

 

[Asim Shehzad]

Hi everyone
I had an issue with man roland 900 lenze inverter with this reference : Lenze E82EV751_4B040 and i wanted to change it with another one with this reference : Lenze E82EV751_4B the only difference is in the output frequency
i have a uploaded a pic of the two of them
i copied the program from the old one and i did laod it on the second one but it didnt work ? Anyone can help ?

I think the interface module is not working with Lenze E82EV751_4B as shown in the picture, different switch positions have different baud rate settings for communicating so try with the old interface module.

 

[er.bajaj001@gmail.com]

Hi everyone
I had an issue with man roland 900 lenze inverter with this reference : Lenze E82EV751_4B040 and i wanted to change it with another one with this reference : Lenze E82EV751_4B the only difference is in the output frequency
i have a uploaded a pic of the two of them
i copied the program from the old one and i did laod it on the second one but it didnt work ? Anyone can help ?

You have to make Changes in Program.
Send me a copy of It will do it.
Please take a Note it will be Paid.
mbajaj@bajajengg.com