Man Roland UWR and RTR fault

[Isko030190]

Hi, need help regarding with my problem on UWR, while running the machine just stop and fault shows like in the picture.
Needed help badly, thank you so much!

 

[drukman]

Check the input relay card in the delivery SPS. Change it.

 

[Isko030190]

Hi sir, sorry not yet familiar with input cards, can you specify the location of the delivery SPS? Many thanks sir

 

[drukman]

Only if you specify the year of the machine.
El box of delivery. A353, second place.

......if you don't know where the SPS is on delivery, it's better to leave the repair in other hands.

 

[Isko030190]

Hi sir, I've just checked the model of our machine. It's a R900 series year 2002. And I checked the manuals - I just cant find the A353 rack.

 

[drukman]

Delivriy, "B" side, right door.

 

[Sandeep kumar]

You look not familiar with machine .please ask for some specialist engineer of manroland

 

[Asim Shehzad]

you can find the A353 rack in the picture as it's in the machine panel and its slot 2 board from left to right.

 

[Isko030190]

Hi again, still encountered UWR fault. I've already check input card at SPS and UWR, interchange it and even use new input card but the fault still exist.
Are there any other to check? Like back plane or even cables?
Many thanks!

 

[Isko030190]

UWR fault

 

[Isko030190]

Please see

 

[drukman]

Take a picture of this area.

 

[Isko030190]

Here sir

 

[drukman]

This is wrong.
Defective relay board (slot 2) or input board (slot 3). It is possible that the motherboard is defective, but I have never seen such a defective one before.

 

[Isko030190]

Does motherboard your saying is th one in the console area sir?

 

[Daniel.Sanchez]

change the slot 2 card

 

[drukman]

Does motherboard your saying is th one in the console area sir?

First change relay board (slot 2) end input board (slot 3)
Motherboard or backboard is behind these 2 boards