sergios68

which machine model and Nr? can you share the ID plate from machine

can you show me the totalizer from machine... total sheet counter and hours. and a short video from MMS card in central console

this is a very old machine, serial 718!!! it is very probably the hard disk has corrupt data or the software installation for leitstand...

there are a lot of fails on the printing unit 1, looks like 24 VDC is missing and affects several bytes, any thermomagnetic switch off?

check the DC source for the control inside the technotrans

the current exciting out of nominal values means the main drive detects over current, you must verify the oil viscosity, do you have the...

what is the machine Nr? can you share the firmware version of your drive?

MIsael You can speak spanish with me, maybe is better for you then we can clarify your questions. +52 8122126678

the pattern lines in the direction of printing looks like is coming from the plate image, you said without water the solid is perfect...

when a solid printing without water and the density becomes more weak at the last 1/3 of the cilinder surface means the cylinder bearing...

Trabelsi, when a fail found by UWR in station 8 , you have a R705LV then station 8 is the printing unit 5, you must remember at all...

hi Lenam, what is the Nr machine and serial?, normally there is a plate with the ID from your machine at printing unit 1 delivery side...