Komori transfare cylinder rust

[Meny]

If you have rust on your transfare cylinders (Komori full cylinders)
I have a very good solution (and i do not mean buy a Heidelberg)
use it once and it will hold for years , looks good and will not fail.
also good for sellers who want to sell a press with no rust

 

[aqazi81]

do u have any solution for chromed impression cylinders? can we restore the chrome after repairing a damaged cylinder?

 

[Meny]

Chrom cylinders

Dear Sir
Chrom cylinders are easy to repair once you have the right equipment & know how.
you refil the chrom missing layer by layer with electrolisis to get the right surface that will re-protect the cylinder as if it was original chrom.

This is not cheap but worth it
If you want we can send someone to you to do the job - we have a very good guy doing this for years.

 

[KILRONE]

Ok, but if you cant get them rechromed, this is what I did.First I cleaned and sanded off rust, wipe down cycliners with v-120 then alcohol. After completely clean, spray paint them with rustoleum primer. worked like a champ. apply light even coats.

 

[John A.]

Meny,
What is your solution to rust on the transfer cylinders?

 

[Meny]

Solution is a polimer that connects to the metal like steel

A special polimer designed for very bad conditions for steel , will connect to the steel & rust in a way that you will have no problems for long long years

Apply with a brush or spray - what ever easy for you
no need to clean before- direct on the rust and forget the problem you ever had

Cost - about 46 $ / liter
2 hands will do
a liter is good for 2 cylinders if not 3