rollers

Hello, I currently have an issue on 1 Printing Unit of the 4-Color SpeedMaster. When printing all over the sheet, no matter the size, there is always a color difference in the first 10 cm of the sheet (starting from the gripper). I have attached an examples image for reference. When placing...

I have several new rollers for the Heidelberg M-Offset. These are Rotadyne Press-Ready rollers including cores, new in original wrapping and box. I also have four oscillating form rollers for the MO as well. Please contact me for additional information or if interested. Thanks!

Hi. Not sure what subject to put this in but our 4th unit on our komori will run fine (i think) but when the run stops there is loads of ink on the rollers of the 4th unit. we run the yellow at 0.90 and it stays level but if we stop and start again its up to about 1.40. if we sheet off and run...

Hi, I have a GTO 52, 2 color machine with no chiller plants currently installed. I am interested in installing this chiller unit for keeping the rollers cool. Could you recommend me companies for installation of this plant? Additionally, I have two machines of the same...

We are in the process of updating our Press Maintenance schedules & SOP's. Your feedback to the following would be appreciated. 1) How often do you change rollers on your press's? 2) What is your criteria for changing a roller? 3) How many rollers do you keep on hand? (we have 4 and 5...

hi; I lost the water rollers of mi hamada DU34II. does anyone can provide me the Dimensions of rollers or the manual of machine ... thank you

If you need parts for your Heidelberg, Ryobi, Man Roland or Mitsubishi? Please take a look at http://store.printersparts.com We have over 37 Years experience and we are here to help you. Come by our store, we are always adding more parts every week and specials for our customers :cool:

I Run a Ryobi 3304ha i leave the regular process ink on the rollers overnight it stays open and does not skin up. I do spray a small amount of anti skin on the rollers. Does anyone know if this shorten the life of the rollers or cause any other problems. Thanks

Has anyone tried Westlands Weroaqua dampening rollers or the new Werodamp Lototec roller. Lototec = Hydrophobic coatings for pan rollers in dampening systems What is the connection between the lotusflower and Westland GummiwerkeGmbH & Co. KG? A great deal, becausethe way...

Hi, does anyone know whether there are any command on the classic qmdi printing without the inking form rollers to the printing plate ? Thanks in advance, regards. Zarko

I have never done this on my own but have to replace the rollers on my cyan unit tomorrow. Usually i have an engineer or another printer at least helping me. Ive seen it done and done it a few times helping out. I want to get it right myself. i can set most of them and make adjustments when...

On my komori 44Sp I am having trouble with my water pan rollers inking up. Mainly just the black and yellow. I am confident its not a water supply issue tis just started a month ago we have not done anything different we have 7 Heidelbergs that are not having issues just our Komori. What I have...

I run a 4 color Solna heat set web and I have a serious issue. I am getting a lot of rollback or feedback of ink onto my water feed rollers. I run a onestep fountain solution with a 4.0 ph, I have conventional water system and the feed roller is covered with a paper sleeve. If Marcus...

Hi DI guys ! I installed all new ink form rollers (3pcs in each unit) and new ductor rollers (all from Botcher, incl. new bearings). But distribution rollers are still old (3 pcs in each unit). From time to time in some jobs i have problem with tonning. This is visible on printed sheet as...

Hello Does anybody knows how many millions printed sheet you can print with new Wesland inking rollers and new Bottcher inking rollers. Is there a diference? Thanks and Regards

I've been running a Komori LSX 629 w/coater since the start-up of the press in 2007 . It seems that, almost like clockwork, the water forms need to be changed out in 10 or 12 months. I'm getting, somewhat consistently, a low spot in the roller about 2 to 4 inches from the drive side of the...

Hello Are westland inking rollers OK? Thanks and regards Borut

Hello What is the difference between BOECHER rollers and WESTLAND rollers. Westland are better for dampening system, boecher rollers for inking system. WHY? Borut

hi again davor i do the registration again of the 3 yellow rollers form to the plate. 1. i do the 2 rollers form plate to 3-4 mm,and the third rollers that touch with plate at 2 mm but at the 3rd roller i see something wrong.this rollers dont makle an uniform line(or paralel) at the plate but...

Hi from Brasil. I always try to improve my print quality, and searching on the net i found this url: http://www.parkdaleparts.com/litho_roll.pdf Please any one know or buy this rolls? And if i buy i change 1 or 2 forms (my machine are a multilith 1250w 2 forms rolls) tanks sorry but...