Manual die cutter?

[mfr]

Hi there,
I have a small weekly job of printed fridge magnets that needs die cutting every week (print stuck to magnet stock). The job is usually only 50 to 100 sheets of A3 that needs die cutting.

Can anybody recommend a simple (possibly manual) machine that could do this job so I dont have to send it out?

Thanks!

 

[saso777]

You can use some small second hand die cutter (Tigel or something else) they are cheep but good for this kind of work.

 

[mfr]

Thanks for the reply Saso777 - Can you send me a link or point me in the right direction? I had a search around google but did not come up with anything. It could be that I don't know exactly what I am looking for. Tigel had no results at all.

Thanks.

 

[saso777]

OK mfr check this web site http://www.wzkingsun.com/product.asp?cla=391 you can find there something for you I'll send you more info tomorrow from work.

 

[plotter]

id get a roland camm gx 24 it will read position marks and cut out lovely, you only need to score the face of this stuff and it pulls straight out. you can also use it to make banners, car graphics and signs. i wouldnt be without mine