Manual die cutter?

Discussion in 'Cutters and Trimmers' started by mfr, Mar 17, 2012.

  1. mfr

    mfr New Member

    Joined:
    Mar 2012
    Messages:
    2
    Location:
    Australia
    Hi there,
    I have a small weekly job of printed fridge magnets that needs die cutting every week (print stuck to magnet stock). The job is usually only 50 to 100 sheets of A3 that needs die cutting.

    Can anybody recommend a simple (possibly manual) machine that could do this job so I dont have to send it out?

    Thanks!
     
  2. saso777

    saso777 Senior Member

    Joined:
    Sep 2011
    Messages:
    54
    Location:
    Bitola,Macedonia
    You can use some small second hand die cutter (Tigel or something else) they are cheep but good for this kind of work.
     
  3. mfr

    mfr New Member

    Joined:
    Mar 2012
    Messages:
    2
    Location:
    Australia
    Thanks for the reply Saso777 - Can you send me a link or point me in the right direction? I had a search around google but did not come up with anything. It could be that I don't know exactly what I am looking for. Tigel had no results at all.

    Thanks.
     
  4. saso777

    saso777 Senior Member

    Joined:
    Sep 2011
    Messages:
    54
    Location:
    Bitola,Macedonia

  5. plotter

    plotter Senior Member

    Joined:
    Feb 2009
    Messages:
    376
    Location:
    south wales uk
    id get a roland camm gx 24 it will read position marks and cut out lovely, you only need to score the face of this stuff and it pulls straight out. you can also use it to make banners, car graphics and signs. i wouldnt be without mine
     
Loading...