We've had a Konica Minolta 12000 and a 14000 for about seven months now. Great printers but not without issues. Anyone else have either of these...
Hi, I am having issues printing to my KIP 3100 series over my office network. I am able to print through a web browser if I go to the IP...
Hi Folks, I am a new igen4 Digital Press Operator and I've been facing a paper jams problem with the paper size 364 by 658 mm with the weight of...
Hello, I have a Docucolor 240 printer and I´m having serious issues in the Black and white copies or printings, I have already change all the...
I have a C500 and the color is not coming out uniformly as shown in the attached test pictures. There are darker bands and lighter bands where...
Hi, We have been having the same problem with the feeder on our DI for about a year now, you can be feeding card one minute and then the pump just...
I am printing from a Mac, running Snow Leopard. I have tried outputting the same file from Quark 7.5 and Indesign CS3. Both outputs give me...
We have a C1+ that we bought in april - It seems to have 2 reoccuring problems - first, a black "toner spray" appearing on the operators side -...
Hi guys, I have just registered on here because I am sick and tired of Xerox giving me hundreds of different answers to my problem. I have a...
Hi, i am currently using a Xerox Docucolor 5000 to do digital prints. After lamination, one of the job finishing which requires the printed...
I understand the volume on an IGen3 is very high on these machines, (what is the best volume run per month ) warming up then keeping it running...
I know this sounds stupid. I cant seem to get the machine to register single colour work(book work ncr). I tried doing what the book says but...
Does anyone else have an IR 5185 with a H1 controller? If so, do you have the following problem? For the past 9 months our copier has...
Just another one, when I set jobs through to the bypass tray, the machine always halts and I have to manually tell the machine to source paper...
We have a Minolta 3102 and have this terrible spooling issue with PDF's. When I send one file to print, it prints fine. If I try send 2 or more,...
I've been operating an iGen3 for over a year now, and have still failed to find a solution to the following reoccurring problem: Along the...
the dryer on our 1040 lithrone will fault out time to time with what is called a waterflow error. I usually have to reset the system to clear the...
When printing mixed paper of size, it interupts with "adjusting finishing unit" delaying 5+ minutes between paper sizes on each job- half an hour...
Good Day All, I have have a bit of a dilemma here and am hoping someone can shed some light on this. Background - I work at an agency for a...
I am having problems with registration. Forced registration(05-407) has produced no results. Change registration motor with no results. Last thing...
