cpc

We have a Heidelberg MOVP 1986 CPC 1.01 and we are budgeting for the implementation of CIP3 - but our CPC version does not have a memory card slot or a tape drive. Analyzing the external part and the electrical boards with empty slots, we would like to know if it is possible to adapt an...

Good afternoon. I work with a SpeedMaster 52 2000 5 colors with CPC. I want to realize on the press conversion from perfecting to straight printing. On CPC, the press is in perfecting but mechanically the press is in straight printing. The press has an error on Printing Unit showed at the photo...

A vintage (early 1980s) Komori PQC is struck as follows: 1) Plate register moves the plate up and down but the display values on the PQC don't change,i.e. the reading is struck at 0.47 for all units. The card is Nikki Denso made and problem is for all units. Any tips on what may be wrong?

Hello... I`m a new member here, and also new to the whole offset printing world. In the printing studio where I work we have a problem (after moving to another location) with CPC. I now it could be thousand reasons for malfunction (technician that disassembled the machine comes with a lot of...

Does any one know the Heidelberg CPC 1.02 console functions or have manual in English for it?

We have an intermittent problem where the side guide positioning motor stops working intermittently. A motor is flashing screen for the ssk 2 board. I am trying to understand the difference between dyn and init test and the screens that toggle t+0 and t=-1. If someone could explain these...

Dear friends, I have a Lithrone 526 0f 1989 make. Today morning when we started the machine we found that the PQC is not able to operate Ink Keys. All other functions from PQC are normal. Today morning there was some fluctuations in one phase of main power supply line. I need help in restoring...

Dear Friends Thanks in advance. I need zero settings for Sinohara 66 VI PR, CPC Model - OS-66-III. The zero setting in the machine is destroyed. Can any one help us. Regards Ashok Mehta

Dear friend I have a Sinohara 66Vi PR offset press, Sl. No. 90011228 with CPC Model OS66-III. The system displays the message that Zero Setting Destroyed. Can any of the friend suggest the way for restoration of setting or help us in getting ZERO SETTING DATA( FLOPPY). Thanks Ashok Mehta

The monitor on our Heidelberg CPC 21 is starting to die. I have been putting quite a bit of research into replacing it but I am missing data. Has anyone else done this? What did you use? I have tried a low frequency LCD but it was still out of range and frequency converter boards but I am...

I was running the press when the CPC console display ("ZID") went out. We called Heidelberg to get a new one they said it was $5000+ so we decided to save some money and bought one out of Florida. When we put the new one in the press the display showed the lateral and horz. positions at zero...

I'm just going for 4 col Heidelberg MOV and want to know more about CP tronics and CPC 1-02. Also please clearify me what is Bacher register system. Is Remote register possible in MOVP 1991. Thanks in advance

im gettin it in my cyan,keys are not working...

I am in need of many parts for this press, my father who has past away on Oct 5 had ordered this from KNONIK in Florida, the press was dropped and has sustain some damage. I need two of the inking units with electronics, among many others, if you are interested, please email me, at...