Search results

I've recently been getting some crashes on our QMDI Pro where it will come to a hault. During the crash, it resets my counter to a previous number, disengages 1-3 units and some blowers come on briefly. It's like it's going into a reset state. I've noticed in the past that resetting the plug on...

Hello. I am looking into some sort of perfing system that could work on the DI. We have been looking into Litho Perf a bit, but I would like some input from anyone who has some insight on this or has used any type of perfing product on the DI. Thanks!

Hello. We have an Airtech quickdry powder/dryer system on our press. Recently we stopped receiving powder out of it. I rebuilt the dryer system and replaced the manifold in the spray system. All lines seem to be unclogged. When I use special function 04, i can turn the system off and on and...

I am in the works of replacing a couple of laser diodes on our QMDI Pro. I am more or less winged it the last couple of times, but now that I replacing a couple more, what is the correct number to use as the new identification number for diode? It looks like it accepts a 3 digit code, but I'm...

On our QMDI Classic, we have been noticing a decrease in blast air on the feeder. I checked the vacuum pump and there was air coming out of the pressure release valve on the pump. I went ahead and pulled off the front plate and pulled out the two filters. The right filter is filled with a...

Hello all! So we are running a QMDI classic and Pro. On our pro, I have been getting toning/banding issues for a few months now on the #4 unit. It only takes less than 50 sheets for the toning to start. Sometimes it can be on the first sheets coming off. I have pulled all of the rollers...

I have a QMDI-46 Pro. Normally when running the press, during a jam-up or if the machine pulls a double, the suckers will still have a grip on the next sheet that it is about to pull, so I can just clear the misfed sheet, turn the press back on to impression and away we go. However, now what...