Polar 76EM Error code 29

[Toni Koskinen]

Hi

We have a Polar 76EM and it got the code --29- on the screen. The error appeared when we were about to start the operation and keyed in the measurement and after that the machine froze and did not respond to the keys. After restarting the machine, the error appeared on the screen. The screen has been removed and examined, but we have not found a fault. What could be done about this?

Best regards
Koskinen Toni

 

[Mathew]

Can you send a photo from the error? 29 is not listed in the errors. Are you sure about that?

 

[Toni Koskinen]

Can you send a photo from the error? 29 is not listed in the errors. Are you sure about that?

Hereis code and machine number.

 

[andy martin]

Error 29 means you have a stuck or faulty key on the keyboard

 

[Toni Koskinen]

We were able to figure it out and the problem was already fixed. The machine works normally again.

 

[Gintas]

We were able to figure it out and the problem was already fixed. The machine works normally again.

Glad to hear the machine is working normally again. Would you mind sharing what caused the issue and how it was resolved? It would be helpful for us to learn from your experience.