Midlan Infrared Dryer systems

Does anyone have any information on Midlan IR dryers? I have a press with one on it and need the operator, parts, wiring and service manuals for it. It is going on another press.

 

Hey Griz, I installed these for Midlan in my area until they went out of business, there was really no documentation sent, except for one page of basic install info. The only info I can give you is that you can get lamps from Soneko.

 

Thank you Junker. I kind of figured that. It won't be the first time I've had to make a wiring diagram to re-install it on another press.

 

Dear Sir,
Recently I installed Ryobi 3304HA machine, equipped with Midlan ir drying system. But I don't have the wiring diagram for Midlan. Please help me to install this equipment.

 

Does anyone have any information on Midlan IR dryers? I have a press with one on it and need the operator, parts, wiring and service manuals for it. It is going on another press.

 

See second post in this string. The only documents shipped with these dryers while the manufacturer was in business was an installation diagram specific to the press it was ordered for.

 

If you’re going to install it on the same model press, it will have all necessary brackets. If the press is different, you’ll have to likely modify or make new brackets.

 

Hi, I brought a piece of equipment and it came with the one connected in this way where a signal for the dust is connected, and the horn to make the sound before turning on

 

Hi sir:
I saw it the green or Ground, is NOT connected properly , connect to the chassis, and see if every ground is connected properly for the Dust device, and blue wire is NOT connected!?

Connect it , according the schematic wiring diagrams, Do you have ?

 

The blue wire is the signal from the horn, I put it like this just to show it, and it wasn't all connected yet, I just showed it so you can see it

 

I'm not looking for help, I'm just showing that this is connected like this and it's working fine, the machine's manual doesn't contradict it, it just says that it's a signal for the dust.

I show it in case it helps someone, I have been installing the Ryobi 3304h for years but I have only seen the Tempest and midlan systems

 

Ok sir.

Blessing