non-operation of the dryer Heidelberg CD102 S + L

We own a Heidelberg CD102S + L machine. The dryer is GRAFIX brand. On the control panel of the dryer, there is only the mention GSTA sach Nr 34.02-01 vers down. we changed lamps. No signs working. I ask you to guide me so that I can put the Seheur on. but the rest of the machine focntionne

 

Good day sir:
Hope you are well
Please check the following:1) Check IR lamps: connection for Shorts or Ground 2) Check c. breaker and electrical contactors for defective. 3)check if the air blow path is blocked 4) examine wiring +contactors+safety device+heating elements.
Let me know any question, and version of wiring diagram for Grafix o a little Pic.

 

Thanks for the orientation.
We do the checks and give you a result.

 

ok
let me know please

 

When assembling the machine we received the electrical diagrams bearing the following numbers:
Grafix 190
CH.170.5906
800-325-2850
We find that these diagrams are different from the reality, therefore of the electric circuit in place.
On the console there is only the mention GSTA Sach Nr 34.02-01

 

Dear sir:
Did you chechk the steps that i did suggest you?

 

Hi can you see the ID of plate of Dryer
of GRAFIX please, or send me a PIC.

 

Dear Sir:
Please review the following too:
1) contactor k41m for blower of thyristor
2) Power supply for +24 for contactor.
3)power supply ATC sensor 15
4)k11 contactor for Thyristor SHS

 

We found that the guidance elements are consistent with those found on the machine. And contrary to our wiring diagram. Could we have the diagrams you use to guide us?