SM-52-5PL Plausibility check problem!

[AnotherPrinter]

Hello Senior Technicians
We recently bought a used SM-52-5Pl year 2007, after moving the machine in and install it by an expert guy and after power it up to make a test run we couldn't even inching the press! an error came up first with plausibility check and other messages, we checked every connection and all good, willing to pay to get this issue solved!
Just a quick note: one of the errors messages showing "Emergency Botton Actuated " feeder side while actually it's not!
Thanks

 

[Mathew]

Send some photos

 

[PWInc]

Where are you located in Canada?

 

[AnotherPrinter]

Send some photos

Sorry, it was a wrong picture, I posted a screenshot.

 

[AnotherPrinter]

Where are you located in Canada?

I just posted a new picture

 

[Grant B]

Looking at your last picture, it appears that you do not have air pressure.

 

[Grant B]

And I just saw, that it's indicated you don't have air.

 

[Grant B]

I see the plausibility acknowledge button, what happens when you press it?
Plausibility can occur if you're lowering the feeder pile or the delivery pile and the up button is pressed to stop the lowering movement. A sensor triggers the jarring movement and activates plausibility.

 

[AnotherPrinter]

And I just saw, that it's indicated you don't have air.

The air pressure problem been fixed after I took that picture, just the plausibility check error is still there!
I will check the sensors of both feeder and delivery and get back to you.
please share your contact details.
Thanks

 

[Grant B]

What happens when you press the plausibility button?
Your profile says you're in Canada, where?

 

[Grant B]

That's what you press to clear a plausibility fault.

 

[AnotherPrinter]

I clicked it and it clears up the plausibility error, but if you restart the press it gets back again! and the press cannot be run as it still shows "Emergency Botton Actuated on the feeder side".
Here are some pictures before and after clicking the plausibility button.

 

[AnotherPrinter]

I am in Alberta

 

[AnotherPrinter]

I just discovered this detail after clicking on the error!

 

[AnotherPrinter]

Can you share your phone number?

 

[PWInc]

Is this the press from Metropolitan fine printers?