Xl106 'check ink stripe' inspection layover.

Does anyone have a layover or some indication of what rollers are situated on the printed sheet with the help of the automatic wizard ? Thanks..

 

Form rollers

 

There's many ink stripes on printed sheet. I was under impression it showed you multiple ink stripes...other than of course formes

 

Any chance to post a picture of the sheet?

 

Found it!

I knew it wasn't just the formes. Pic coming shortly

 

Dear Sir,
This is (Rollers check assistant).
There is an attached colored foil comes with the machine.
Once you choose a unit and execute the command, some sheets are printed, choose one clear sheet, and apply the attached foil over the sheet so it indicates you for each roller and where is it's strip in the sheet.

 

Hi sir
this option is used to clearly see on a printed sheet the ink touch between the ink touch rollers on the printing plates the ink touch rollers on the sliders the dampenning touches on the plates and the dampener touch on the degreasers.... etc

 

This makes it easier for the operator to do a quick check without dismantling all the rollers and wasting time

 

All that bells and whistles
3 minutes vs 30? No way There's no chance to do it in 3 minutes (inking up, print 12 sheets, checking with the film, adjusting, and for sure checking again) And there is no chance to do it in 30 minutes at normal way. I can do it easily in 10 minutes per unit (includes coffee break)
To be honest, doing it at normal way taking the same time or even less than doing it with assistant