Service Manuals for some older machines

[klen4]

hi, can you help me with the service manual of sm 74?

 

[Color Printing Forum Admin]

Just a quick reminder: While I greatly respect people for wanting to be able to maintain their own presses, or at least have the information to oversee maintenance and service, please don't get the forum into trouble by requesting any restricted or illegal (still copyrighted) material.

It is fine to sell, trade, request or give manuals (e.g. operating manuals) as long as they are not prohibited from sale/trade and don't violate copyright (if they are out of copyright for example).

Thank you for your understanding.

 

[aqazi81]

If someone is selling the manuals then its violation... but if someone wants to share then I dont think so that its violation....anyways we understand and respect your policy.....

 

[macmorenis]

Hello I need manual instructions of heidelberg GTO 52
Thanks in advance !

 

[MrDiecut]

Hello... I am looking for a service manual for a S28 Heidelberg Cylinder Press. It would be great if it was in a PDF format. Since I am working on the feeder... A KORD manual would also work since the KORD uses the same old single sheet feeder as the older cylinder presses use.
Thanks....

 

[litobispo]

I am new to this forum and have been reading many of the treads on this site. I have seen a few about service manuals for some older machines. I am an ex Heidelberg guy, was employed by them for over 18 years and have tons of documentation, much of it could come in very handy in this forum. If anyone has any documentation they might need, send me a PM and I will see if i can find something.

Hi exheidmech,

I am looking for diagram for Heidelberg front alignment control BAE (Teldix HDM 68.110.1312). If you happen to have a copy, could you share one to me? Thanks in advance.

litobispo

 

[litobispo]

KORD and GTO electrical Diagram
first change file extention pdf to rar than extract File to folder

Hi there,

Could you possibly resend or repost your pdf copy of gto.kord? Cannot open file. Thanks

 

[PDPRINTUK]

Hello.i class old heidelbergs as k-line,s-letterpress,gto46/52,m'o..All the newer stuff will be computerised on discs etc..i have seen paper manuals for the older machines..thanks..

 

[HippoGraphics]

Hello,
I am in urgent need of Heidelberg SM 74-2-P, 1994 service manuals. Please if you could share, contact me on tsarova@hippographic.eu
Thanks!
Yana

 

[LLS northwest uk]

If someone is selling the manuals then its violation... but if someone wants to share then I dont think so that its violation....anyways we understand and respect your policy.....

I think you will find anyone releasing any service manual to a non Heidelberg employee would be in copyright infringement there fore if found out could be sued by heidelberg plc

 

[Cleg]

U may also send to me

 

[LeoferGraphix]

Hi, I'm about to buy a Used Kord 62, can you send me it's Operating & Service Manualrs for my reference? my email address is leofergraphicarts@gmail.com.Thanks in Advance!

 

[Color Printing Forum Admin]

Just a quick reminder: While I greatly respect people for wanting to be able to maintain their own presses, or at least have the information to oversee maintenance and service, please don't get the forum into trouble by requesting any restricted or illegal (still copyrighted) material.

It is fine to sell, trade, request or give manuals (e.g. operating manuals) as long as they are not prohibited from sale/trade and don't violate copyright (if they are out of copyright for example).

Thank you for your understanding.

 

[dea555]

Heidelberg SM52 service manual

Hi To everyone!
I have Heidelberg SM-52 Operator manual in Russian
I need Servise manual for SM-52-2 CPC !
With Best regards
Thanks a lot!
my mail is dea507[dog]yandex{dot}com

 

[nadarazvan]

I need a service manual for Heidelberg Cylinder.
Help is much appreciated!
nadarazvan@yahoo.com

 

[odiorchukwuka]

PLEASE, CAN YOU SEND ME MOZP SERVICE MANUAL TO KEEP GOING, I WILL APPRECIATE, GOD BLESS AS YOU HELP
MY EMAIL: odiorchukwuka@yahoo.com
telephone: +234-8035376467.

 

[maverick1971]

Hi, Please could you help with service manuals or any relevant information on Heidelberg QM DI 46-4, Heidelberg QM 46-2 or Heidelberg Printmaster 46-1.

Also do you have any manuals for a HEidelberg Cylinder KSBA? Any assistance would be greatly appreciated.

Regards

Shawn (South Africa)

 

[odiorchukwuka]

HELLO SHAWN, WHAT YOU NEED WILL NOT BE POSSIBLE BECAUSE OF COPY RIGHT LAW, BUT IF YOU HAVE ANY PROBLEM WITH QM46-4 DI PRO, OR QM46-2 (CONVENTIONAL), YOU CAN CALL THIS NUMBER (+234-9035376467) OR EMAIL: odiorchukwuka@yahoo.com FOR ASSISTANCE.

 

[PDPRINTUK]

HELLO..THE PM52 IS THE LESS AUTOMATED SM52 PRESS..IT SHOULD BE AUTOMATIC PERFECTING..IS IT CP2000 CONSOLE..ALSO DOES IT HAVE ALCOLOR AND CPC DUCTS OR LEVER INK DUCT AND NORMAL DAMPING..CONTACT ME AND GIVE ME FULL SPEC PLEASE AS MAY BE ABLE TO PULL SOME STRINGS WITH A CONTACT TO HELP YOU.. mcparts2008@googlemail.com BEST REGARDS,PDPRINTUK.

 

[iddmonster]

Hi
Looking for a parts book for an old SORDZ serial 506388. Our aging press has a lot of issues and any help would be appreciated.
Thanks