ryobi 3300cr going off impression

hfxprint

Member
Joined
2015
Posts
5
Geo
Nova Scotia
we have a ryobi 3300cr that goes off impression randomly as if the sensor doesnt detect the sheet. Seems worse on multi colored ncr sheets. have tried adjusting the sensitivity of the sensor to no avail. had a former ryobi tech look at it and he thought it was the EYE that works with the sensor, but says its discontinued. Any thoughts on what might be causing it. Faster you run the worse it gets.
 
check that your timing on feeder is correct. also check springs /that pull impression cylinders on are in goood shqape.
 
    • Dear hfxprint-try giving our technician a call, won't cost you anything and you might get your problem resolved. Contact Paul at Ryobi Press Parts at 800-901-3304
     
    You must log in or register to reply here.
    Forum posts represent the experience, opinion, and view of individual users. The Color Printing Forum does not necessarily endorse nor share the view of each individual post. When making any potentially dangerous or financial decision, always employ and consult appropriate professionals. Your circumstances or experience may be different.

    Similar threads

    problem with stripes Ryobi 3304HA
    Replies
    2
    Views
    760
    John Zidek
    Ryobi 750G 6+C Led UV.
    Replies
    0
    Views
    624
    Raimis
    Ryobi 750G 6+C Led UV problem. Error E-004. Abnormal crawl speed was detected.
    Replies
    0
    Views
    618
    Raimis
    Ryobi 750G 6+C Led UV problem with Ink knifes when the press is turned off, Ink knifes on the console shows 0.
    Replies
    0
    Views
    622
    Raimis
    Ryobi 750G 6+C Led UV problem with Led UV lamps turning on.
    Replies
    0
    Views
    710
    Raimis
    Back
    Top