printed

Hi dear, ... I use the HP Indigo Press 5000. and I had a problem with the print. Why Indigo print results easily scratched and peeling off when removed from the stacker or when done in pieces?? what else if the image is black 4 colors!! while the prints coming out of the machine is perfect...

Hello all, I have a unique printing need and I am not sure who to go to. I figured you all could help. This may sound silly, but I have some trading cards that I would like to have some additional number printed onto. They are about 120pt thick and glossy surfaced. I would like to add numbers...

I have a Lexmark C510 printer that prints fine, except for the fact that it prints small coloured lines all over the sides of the printed page. The lines appear on exactly the same places on every page. There are also some lines printed on different spots closer to the middle of the page. What...

I have a Heidelberg QMDI 46. From the operator side to the non-operator side about 4 inches from the trailing edge, there is a yellow line showing up. It is not on the plate and we have taken the rollers out and cleaned them by hand, but the line is still there. Any ideas?

I had printed a cover that was supposed to be printed black with white letters. The first printing was fine (Book on left and right). The second printing (center book) by the same printer with the same artwork turned out a few shades lighter. So much lighter that I am refusing the order. The...

Is it normal for color laser printed output on uncoated paper when run through a plockmatic 310 collator to develop quite a bit of static on the emerging sets, sometimes? (enough that sometimes you can't even hand jog them straight without peeling the top sheet off to break the static cling...