Search results

We have a Quickmaster and the second unit plate cylinder has play. It moved back and forth circumferentialy nearly 3/16 of an inch. Does anyone know what is involved in repairing this. Richard

We are having an intermittent problem where error 603 knife position error occurs. The message says wind up the cutter. We have discovered that the only way to clear the error is to turn the cutter off for about 1 to 2 hours. Winding the cutter to the top doesn't help. Has anyone ever had...

I am having a problem with our quickmaster. Does anyone know the gripper degrees.

We have a Heidelberg folder and where the 2 sheet detector is you put two thicknesses of paper. The machine will then automatically adjust the folder rollers. The rollers no longer open to the correct settings. Does anyone know how to calibrate this mechanism.

Does anyone have the gripper degrees for a 10 color heidelberg 102 manufactured 2006. we are having a bit of doubling.

I am getting a warning Knife afterrun (703). Does anyone know what this error is. Richard

We are having an intermittent error that is causing us to have a lot of lost production. We are getting a error code s-hak 4 m3 ffbf. If anyone could tell me what the coad means it would be greatly appreciated. The error appears intermittently in the dyn diagnostic menu.

We are having a very confusing intermittent initialization error. We have lost a lot of production and the last time it occurred Heidelberg took a while to come and the error disappeared shortly after they arrived. The press will say initialization error then in the dyn error t-0 there are no...

We have a dynamic error. The error says s-hak 4m3 ffbf. Can anyone tell me what this means. Thanks Richard

We have a 6 color with a Drystar 2000 ir dryer. We replaced the ir bulbs but we just got an error 2011. This is maintenance, ir max running time reached. I believe I just need to reset or acknowledge the error. If anyone knows how to do this it would be much appreciated. Richard

We have a early year 2000 6 color Heidelberg 102. We have started to have a problem on boot up that the slow down wheels and the water motors won't turn. you can run and start feeding sheets but there is no water. At the console when you look at errors There is a initialization error in...

We have a polar 92 xt and the touch screen needs to be calibrated. Is there a way to do that Richard

we have an old wohlenberg type 90. I need wiring diagrams. The cutter won't take a cut. Richard

We have a 6 color sm102 with a coater. On the Drystar 2000 electrical cabinet I am getting a error 1700 plc backup battery error. In the lower middle position of the plc there is a battery and I changed it but I still have the error. Is there another battery somewhere or do I need to do...

We are having a problem with our machine having intermittent faults. There are two error codes that we get. Error 7951 and error 7956. Does anyone know what could be causing the problem

We are having a problem with the image control unit for a 10 color 40" press. The unit was manufactured in 2002. When the computer boots up at one point it says hasso power fail in the lower left corner. It won't initialize. Any info regarding what this means or how to fix it would be...

We are having an intermittent problem with a quickmaster. The press will be running and it will go off impression and stop for no reason. There are no error codes and it will start up again. I entered service code s56 and watched the screen. When it glitched it seemed to display code 00 08...

We have an intermittent problem where the side guide positioning motor stops working intermittently. A motor is flashing screen for the ssk 2 board. I am trying to understand the difference between dyn and init test and the screens that toggle t+0 and t=-1. If someone could explain these...

We were doing a wash up and the press stopped. An error was displayed synchronization monitor not acknowledged in pu. The next line says synchronization monitor, perfecting. There is a symbol of the storage drum and the sheet reversing drum with a red bar between them. Any help with this...

we are having a pressure problem on one of the units of a 40 inch press. Does anyone know how to check the pressure between impression and blanket cylinder and how to correct pressure if it is wrong. Richard