Search results

  1. Printmaster 74 stops idle run around 265 degrees every time

  2. Printmaster 74 stops idle run around 265 degrees every time

  3. Printmaster 74 stops idle run around 265 degrees every time

    Thank you for your replies i will send photos

  4. Printmaster 74 stops idle run around 265 degrees every time

  5. Printmaster 74 stops idle run around 265 degrees every time

    Hi Our PM74 stops after some time around 265 degrees every time. Even after changing the main motor encoder no difference. Serial no. PM740501.

  6. Backgauge referencing not possible

    My polar 76em had worn out screw rod bearings housing; corrected, but after fixing back, all my backgauge referencing is not possible and values do not appear in the display. The backgauge play front and back near reference area. The encoder bolts were removed and put back after the mechanical...

  7. Polar 76em back gauge movement freeze after cut

    Hi Sir Thank you. The problem the clamp is not coming out immediately after cut so this problem arises. Would you please explain the process which solinoid valve is responsible. Thanking you

  8. Polar 76em back gauge movement freeze after cut

    Hi. My polar 76em back gauge movement and all operations freeze after cut and the the dot is flashing. So I hope something is happening in hydraulic system but not exactly. Any one have answer about this problem.

  9. Polar 92 ED erorr 140

    Thank you for the reply Mr. Chock I found the problem the F4 Bridge leg was little burnt hopefully the problem is in control. Thanking you. Kulasekar

  10. Polar 92 ED erorr 140

    Dear all Good day. My polar 92ed soft starter kimodul was damaged but emergency I like use the machine with a DOL motor starter. When I started the motor I getting a new error Locking valve 25V faulty (140). Is there any wrong in this manner? Please help us. Regards Kulasekar
Back
Top