Backgauge referencing not possible

Discussion in 'Cutters and Trimmers' started by Devraj Kulasekar, Sep 6, 2021.

  1. Devraj Kulasekar

    Devraj Kulasekar Member

    Joined:
    Sep 2019
    Messages:
    5
    Location:
    Saudi arabia
    My polar 76em had worn out screw rod bearings housing; corrected, but after fixing back, all my backgauge referencing is not possible and values do not appear in the display. The backgauge play front and back near reference area. The encoder bolts were removed and put back after the mechanical job. Can you please help in this regard.
     
Loading...