UWR STATION 8
- Thread starter TRABELSi
- Start date
Sergey_Ivanov_1963
Member
- Joined
- 2025
- Posts
- 25
- Geo
- Russia
Station 8 is section 5. Try swapping A350/2. If the problem is in the relay board, the error will move to the other section.
Advertisement:
sergios68
Member
- Joined
- 2014
- Posts
- 94
- Geo
- Monterrey, Mexico
Trabelsi,
when a fail found by UWR in station 8 , you have a R705LV then station 8 is the printing unit 5, you must remember at all manroland machines the printing unit 1 is the station 4 then you can calculate the rest stations numbers.
then using rodimo select stations at UWR go to station 8 and select it then you can find wich byte is missing and causing the source of error.
when a fail found by UWR in station 8 , you have a R705LV then station 8 is the printing unit 5, you must remember at all manroland machines the printing unit 1 is the station 4 then you can calculate the rest stations numbers.
then using rodimo select stations at UWR go to station 8 and select it then you can find wich byte is missing and causing the source of error.
Forum posts represent the experience, opinion, and view of individual users. The Color Printing Forum does not necessarily endorse nor share the view of each individual post.
When making any potentially dangerous or financial decision, always employ and consult appropriate professionals. Your circumstances or experience may be different.
