Have you done a nozzle check? Have you checked the image in Photoshop to establish whether the blacks really are black? Does the selected paper...
After putting 2 litres of ink through our HP K5400, it's now pensioned off. I've struggled to get a CISS or refillable cartridges to work with...
As higher-end portrait photographers, we offer a lifetime guarantee on our prints so the inks need to be permanent. The genuine products for...
Our machine did something similar and it turned out to be a mixture of ink and paper dust stuck to the underside of the print carriage. A quick...
We used a 7800 printer for about 6 years and replaced it with an HP Z3200. The Epson is a very well tempered machine and it gave trouble-free...
May I assume that you understand the significance of rendering intent? When the printer has a smaller gamut than the image, the colour range can...
We have a cheapie Epson P50 that we use for printing CDs and thick paper stock. It has a virtually straight paper path, The ink cartridges are...
With our Z3200, only the light gray and gloss enhancer are used in any quantity. After nine months and about 10 rolls of 25metres x 61cm paper, 6...
We had an Epson 7800 for 6 years before the HP Z3200 and it did indeed give good results but the HP does better. One snag with the Epson is...
When the nozzles on my desktop Epson printer blocked, I removed the cartridges and injected some near-boiling water into the printheads using a...
Thanks for the postscript because that's one to remember!
We should content ourselves with its frugal use of ink plus the superlative print quality when it deigns to perform properly. After 6 rolls of...
We have a Z3200 that seems to have a mind of its own. Ours is the PS version that has a crude built-in RIP, Sometimes it'll "nest" and print...
Unfortunately, an Epson 9900 isn't the sort of product that can be popped into a Jiffy bag! Have you approached carriers to ask about shipping...
We had the 7800 which is kid brother to the 9800 for about 6 years and always used the Epson inks. We try to replace kit before it starts to get...