Scorotrons

indigo2015

Member
Joined
2015
Posts
65
Geo
rome (Italy)
Hello all,

Does anybody knows what causes scorotrons problems? Is there any internal part that must be cleaned very well or some part need to be replace?
Thanks in advance.
 
I've had to spread the pins on the nop side emd a bit sometimes to make good connection. Had to replace the end cap once also. Other than the corona wire, spool, plastic strip and grids they are pretty durable. What issues are you having? Normally the grids get cleaned and inside of the housing when you change the corona wire. I use IPA and windex and clean with a lint free wipe.
 
  • Hi, mainly I can here electric discharges notice and the I have an error SMS. Don't want to replace all the end cap or all the rear cap... or all scorotron.. just would like to know where is the problem and replace or clean that part.
    Thanks for your answer.
     
    Forum posts represent the experience, opinion, and view of individual users. The Color Printing Forum does not necessarily endorse nor share the view of each individual post. When making any potentially dangerous or financial decision, always employ and consult appropriate professionals. Your circumstances or experience may be different.
    Back
    Top