KKVGBG
New Member
- Joined
- 2017
- Posts
- 2
- Geo
- Gothenburg
Good morning all,
We're looking to get an old A3 Riso for our graphic dept but the one we have our eyes on isn't operational and misses a few pieces. Current owner hasn't had much luck in sourcing spares, so we might be looking at machining those ourselves. Since we don't have the original broken parts for measurement, I'm scouring sites for technical drawings of parts – or someone who has the machine and would be able to do measurements.
The attached file shows an exploded view, and it's #45 & #48 that we need. The gear #45 might be the biggest hassle to replace, so if you have any suggestion for how to get specs for those parts I'd be much obliged.
Right now I'm not 100% of which model it is, but it's one of the old A3 FR* ones. I figured that I'd check with you if there's a known repo of these things.
Cheers
Mateusz
Co-ordinator, KKV GBG
We're looking to get an old A3 Riso for our graphic dept but the one we have our eyes on isn't operational and misses a few pieces. Current owner hasn't had much luck in sourcing spares, so we might be looking at machining those ourselves. Since we don't have the original broken parts for measurement, I'm scouring sites for technical drawings of parts – or someone who has the machine and would be able to do measurements.
The attached file shows an exploded view, and it's #45 & #48 that we need. The gear #45 might be the biggest hassle to replace, so if you have any suggestion for how to get specs for those parts I'd be much obliged.
Right now I'm not 100% of which model it is, but it's one of the old A3 FR* ones. I figured that I'd check with you if there's a known repo of these things.
Cheers
Mateusz
Co-ordinator, KKV GBG
