Riso: technical drawings or measurements for spare parts

Discussion in 'Other Color Laser Printers & Color Copiers' started by KKVGBG, Nov 30, 2017.

  1. KKVGBG

    KKVGBG New Member

    Joined:
    Nov 2017
    Messages:
    2
    Location:
    Gothenburg
    Good morning all,

    We're looking to get an old A3 Riso for our graphic dept but the one we have our eyes on isn't operational and misses a few pieces. Current owner hasn't had much luck in sourcing spares, so we might be looking at machining those ourselves. Since we don't have the original broken parts for measurement, I'm scouring sites for technical drawings of parts – or someone who has the machine and would be able to do measurements.

    The attached file shows an exploded view, and it's #45 & #48 that we need. The gear #45 might be the biggest hassle to replace, so if you have any suggestion for how to get specs for those parts I'd be much obliged.

    Right now I'm not 100% of which model it is, but it's one of the old A3 FR* ones. I figured that I'd check with you if there's a known repo of these things.

    Cheers
    Mateusz
    Co-ordinator, KKV GBG
     

    Attached Files:

  2. HPC

    HPC Senior Member

    Joined:
    Apr 2011
    Messages:
    122
    Location:
    Illinois
    Get in contact with this fellow, his name is Rich, knows a lot about Riso. Company name is Green Office Supply. This is a common assy.. too bad I didn't see this sooner, junked one not all that long ago.. chil1rp@yahoo.com
     
    KKVGBG likes this.
  3. KKVGBG

    KKVGBG New Member

    Joined:
    Nov 2017
    Messages:
    2
    Location:
    Gothenburg
    Thanks for the quick reply and suggestion HPC – I'll check with Rich.

    Cheers
    M
     
Loading...

Share This Page