It does sound like an ink water issue,i agree with aqazi81 if you have another ink laying around try running it. If that doesn't help try a...
Also it might be a good idea to bring along a tech you trust to look over the equipment along with someone who has run it before or at least the...
So I'm going to pose a question for you. Where does your business model take you in 1,3,5,7 and 10 years? This may determine which piece of...
The sanco universal works very well with these. You can also move it between presses. The other benefit would be the amount of stock you can load...
I would check the gripper pads first, then the gripper shaft that holds the pads.It seems if the pads are slightly worn on these it tends to...
HI, here in ohio lots of shops have gone under or merged . The one problem we are having is finding qualified people anymore.Ten years ago you set...
Try calcium remover next time.It seems to remove the excess gum quickly.
I have seen the e 5 code as the main power switch going bad also.
This is something i will look into further. Thanks for the advice. I'm sure its much cheaper than pouring a new pad.
That could be another route to take. I'll have to look into it. What gauge steel are you using ? Is there other problems that have arisen from...
Rolandman so many times things are over engineered as we all know. Thanks for the advice. Those small problem seem to always be the worst on...
That's a good resource to have. I know the tech I have looking into this equipment has a check list . It isn't that involved so I might forward...
Thank you yeslek , this is exactly what I'm looking for. I have someone looking into the machine next week. It comes from someone we have done...
That article was good thank you aqazi81.
Hello, my company is looking into buying a used man roland 300 after research. My questions are more geared to operation and how user friendly it...
You're welcome.
Can you move the gto operator over to the qm for a day or so ?
You could try to cut your baseline on that machine by 10 % before you toss a bunch of money at it. If he's running saturated and dumping water to...
So i just had an issue with another type of press but it was doing a similar problem.It wasn't an press problem but an operator error. The...
Check the end play in the water rollers.