Search results

Doubt you will find any of those they are bound to be propriety. I am looking for ink key motors on a 2000 series 40" manufactured by Sayama and getting nowhere fast.

Set the chrome to the water form first best method is to set it so the form roller sits in the gap of the plate cylinder then the form roller/plate setting does not bias your setting or you can lock off the form roller to plate adjustment to get the same effect, then set the form roller to the...

The forewarding suckers release the sheet and the feed wheels just touch at the same time

Well as no one has replied to you yet i will try The sensors on the sprint 228 are set at 295 degres,Check to make sure the eye is turned on and selected,put a sheet on the board and see if the lights are lit or go out,use the paper to determine if the lights go on or off when a sheet is present...

A way to check if it is the oil alarm would be to disconnect the plug to the pressure gage but do not be tempted to leave it disconnected it will eventually cause great damage to the press,do you have the third filter ? if left unattended the press will eventually shut itself off during...

You need to set your swing gripper to 0.5 on the dial you see on the opside it has a small set screw lock on it and use a 10mm wrench to turn and also the transfer cylinders pad heights need to be changed to .5 on both sides of the cylinder your manual shows how to do both these...

Steveo the alarm could be the oil pressure you may have 3 oil filters on that press 2 are with the oil pump and have pressure gauges with with color coding showing when filters need changing and if you have the third it is for the bearings and also has the color coding.Check your oil pump...